Nac TIG5050 Übersetzung Der Originalen Gebrauchsanweisung Seite 38

Instructions for troubleshooting:
Problem
Engine fails to start
Machine runs unstably
Abnormal vibration
GB Blade can not rotate and
work
7. Label
1: Safety signs
8. Key Parameters
Model:
Engine: 5.0HP/3600rpm perpendicular shaft
Working width:
Working depth:
Cutter head diameter:
Cutter head rotating speed:
Dimensions:
38
Possible cause
---
---
Screw loose
Damaged
Pull wire loose
Pull wire damaged
Friction lining of clutch
damaged
2: Switch signs 3: Clutch handle sign
TIG5050
500 MM
200MM
350 MM
82 rpm
1300X590 X 1050
Solution
Consult the operation
manual of engine
Consult the operation
manual of engine
Turn off the engine and
screw down the bolts
Turn off the engine and
replace the impeller
Screw down the pull wire
Replace the pull wire
Replace the friction lining of
clutch
4. Nameplate