Ergotron Workfi t-S Surface Benutzerhandbuch

A
A
Important!
You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product
before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you
set it. If movements are too easy or diffi cult or if product does not stay in desired positions, follow the adjustment instructions to create
smooth and easy movements. Depending on your product and the adjustment, it may take many turns to notice a diff erence. Any time
equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these
adjustment steps to ensure safe and optimum operation.
888-97-176-W-00 rev.C • 11/12
A
B
C
< 5 lbs
(2.3 kg)
D
B C D
< 25 lbs (11.3 kg)
+ + +
A
B
C
< 5 lbs
(2.3 kg)
D
B C D
< 25 lbs (11.3 kg)
+ + +
Workfi t-S Surface Accessory
WorkFit-S, Single LCD Mount, LD
A B C
< 18 lbs (8.2 kg)
+ +
WorkFit-S, Single LCD Mount, HD
A B C
< 29 lbs (13.2 kg)
+ +
User's Guide
Guía del usuario
Manuel de l'utilisateur
Benutzerhandbuch
Gebruikersgids
Guida per l'utente
ユーザーガイド
用户指南
사용자 안내서
A
6 - 16 lbs
(2.7-7.3 kg)
B
< 5 lbs
(2.3 kg)
C
A
16 - 28 lbs
(7.3-12.7 kg)
B
< 5 lbs
(2.3 kg)
C
1 of 4