Dmx Values - Chauvet DJ Freedom Q1N Schnellanleitung

Wireless DMX Linking
The Freedom Q1N can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Wireless Configuration
The Freedom Q1N can be operated in wireless D-Fi mode. For more information about configuring this product to
transmit or receive in wireless D-Fi mode, download instructions for the Freedom Q1N User Manual from the Chauvet
website.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 503.
Master/Slave Connection
The Freedom Q1N works in Master/Slave mode using wireless D-Fi. Information about configuring the Freedom Q1N for
Master/Slave operation is in the User Manual, which is available from the Chauvet website.
You can wirelessly sync an unlimited amount of receivers to one transmitter. To ensure strong
signals, the units should be elevated 5 feet or higher off the ground or remain in an unobstructed line
of sight of each other.
IRC-6 (Infrared Remote Control)
The Freedom Q1N can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the Freedom Q1N User Manual from www.chauvetdj.com.

DMX Values

4-CH
Channel Function
1 Red
2 Green
3 Blue
4 White
6-CH
Channel Function
1 Dimmer
2 Red
3 Green
4 Blue
5 White
6 Strobe
Freedom Q1N QRG Rev. 1
QUICK REFERENCE GUIDE
Freedom Q1N
sends wireless
DMX signal to
other wireless
products
Value Percent/Setting
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
Value Percent/Setting
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  255 0–100%
000  010 No function
011  255 Strobe, slow to fast
EN
4