Create A New Program Pag - Geyer ER116UD8 Bedienungsanleitung

2-3 Create a new program
i
Procedure valid for all types of programs Further settings are described in
the individual programs.
Selection of program type (e.g. with P Standard):
EN
1. Press MENU.
S t a n d a r p
2. Select program type using keys
R a n d o m p
3. Press OK
»
The number of free programs appears for 3 secs.
»
The first program in the memory appears.
F r e e
4. Press
»
The display shows the first empty program.
5. Press
OK
»
S t a n d a r p
The program number is selected.
»
Followed by channel setting.
E m p t y
P 0 2
(only for dual channel models)
Select channel (only 2 channels models)
1. Set channel (twin channel) using keys
c 1 c 2
»
S t a n d a r p
C1/C2 or both flash.
C h a n n e l
2. Press OK
P 0 2
»
The program number is selected.
»
Followed by channel setting.
(only for weekly models)
Set day (only for weekly models)
Select the day or group of days in which the program must be executed.
1. Set the day or group of days using keys
»
S t a n d a r p
The flashing arrow indicates the day or group of
D a y
days selected.
P 0 2 2. Press OK
»
1 2 3 4 5 6 7
Followed by TIME/ON setting.
only for weekly models: if a group of days is selected (eg Saturday and Sunday) and
a time frame that extends past midnight (eg ON = 23:30 hours, time OFF = 2:00), the
program runs two times, but the second run ends on Monday. In this case, the
Monday icon flashes as a warning. This same principle applies to programs lasting
longer than a day.
22
.
to confirm selection.
for 2 secs.
to confirm.
.
to confirm.
.
to confirm.
Set TIME/ON
1. Set program start time using keys
hh/mm.
i
Single pressure of keys moves field by minutes.
P 0 2
Prolonged pressure of keys moves field by hours.
2. Press to confirm.
OK
»
The seconds field appears.
3. Set the seconds using keys
P 0 2
4. Press OK to confirm.
»
The program start time has been set.
»
Followed by TIME/OFF setting.
Set TIME/OFF
1. Set program end time using keys
i
Repeat operations as per TIME/ON.
2. Press to confirm.
OK
P 0 2
»
The program end time has been set
3. Press to confirm program end time.
OK
E n d
A n n u a l p 4. Enter a new program or exit
P 0 2 press the
MENU
Note: if you enter zero in the seconds fields for ON and OFF, the seconds field is not
shown in the data summary.
Programs must also have a minimum duration of one second, so the OFF time cannot be
the same as the ON time. (Programs like this are not accepted.)
Only for weekly models: set the OFF hour scrolling the time forward with respect to
the ON hour. Scroll back to select the whole week
Creating a program with a duration of several days
(Only weekly mod.)
The duration of a program can be extended to several days
(eg, begins Monday at 12:00 and ends Wednesday at
12
14:00). Just scroll past 24 hours when setting "TIME OFF".
14
Scrolling past 24 hours is confirmed
P 0 5
when the day after the start of the program blinks. At every
1 2 3 4 5 6 7
passage from 24 hours, the program will be further
extended to the next day.
in the format
.
.
button several times