Control Functions - Luxura X5 Anleitung

Control functions

The and buttons can be used to select the desired control function. Only the installed options will be shown on the display.
Body cooling
The button can be used to increase the cooling on the body.
The button can be used to decrease the cooling on the body.
The body cooling can be set to 8 levels.
The body cooling cannot be switched o .
Face cooling
The button can be used to increase the cooling on the face.
The button can be used to decrease the cooling on the face.
The face cooling can be set to 8 levels.
Facial tanner (SLi only)
The button can be used to set the facial tanner(s) to the minimum intensity.
The button can be used to set the facial tanner(s) to the maximum intensity.
The value appears at the top of the display and the text 'Facial tanner' appears at the bottom.
Hold the button for 3 seconds to switch o the facial tanner.
Once the facial tanner is switched o , it must rst cool down for 3 minutes before it can be
restarted.
The remaining cool down time is shown on the right side of the display.
Facial tanner (SPr only)
The button can be used to set the facial tanner(s) to the minimum intensity.
The button can be used to set the facial tanner(s) to the maximum intensity.
The value appears at the top of the display and the text 'Facial tanner' appears at the bottom.
To switch o the facial tanner, press
8
until 'O ' appears on the screen.
12:48
Body cooling
12:48
Face cooling
12:48
Facial tanner
12:48
Facial tanner
Face tanners
cooling down
2:08