Parameter Menu - Luxura X5 Anleitung

Sunbed settings

Parameter menu

Hold the , and buttons for 10 seconds.
Enter the PIN code; it is set to 0000 by default. Press
Parameters
The sunbed can be set to your preferences by changing the parameters shown here. The parameters that are not shown in the table may only be changed by
your dealer.
Use the and buttons to navigate to the desired submenu and use
Use the and buttons to navigate to the desired parameter and use
Use the and buttons to change the value.
If you want to save the new value, press
The value is saved and you now return to the submenu.
If you do not want to save the new value, press
Press to exit the parameter menu. If no button is pressed for 1 minute, you automatically return to the stand-by screen.
1. Unit
1. Start time (minutes)
6. Time light on
7. Time light o
8. Unit time
9. Unit date
12. Parameter code
13. Clean time (minutes)
4. Body fan
1. Body fan at start
5. Head fan
1. Head fan at start
6. Xsens
2. Number of Xsens cans
3. Xsens at start
4. Xsens at standby
7. Audio
16. Stand-by volume
17. Stand-by channel
18. Start volume
19. Start channel
7. Airco
1. Airco at start
8. Qsens
1. Qsens at start
3. Qsens initialization
Note:
We recommend that you immediately change the code to a personal parameter code. Save this code carefully.
14
to con rm.
to select it.
; the text 'OK' is selected and the text 'Press ^ to con rm' appears at the bottom of the display. Press
; the new value is not saved and you now return to the submenu. Press
0 = Coin unit / >0 = Stand-alone
Time at which the decorative lighting is switched on
Time at which the decorative lighting is switched o
Current machine time
Current machine date
Unique code for entering the parameter menu
The length of time the display is switched o for cleaning
Speed of the body fan at the beginning of the session
Speed of the head fan at the beginning of the session
Number of installed Xsens cans
Xsens scent at the beginning of the session (0 = o )
Xsens scent during the stand-by period (0 = o )
Music volume during the stand-by period (0 = o )
Music channel during the stand-by period
Music volume at the beginning of the session (0 = o )
Music channel at the beginning of the session
State of the airco at the beginning of the session
State of the Qsens at the beginning of the session
Bleeding of the Qsens system
to select it.
to return to the main menu.
Default = 0 (Coin unit)
Default = 07:00
Default = 23:00
Default = 00:00
Default = 01-01-2012
Default = 0000
Default = 01:00
Default = 1
Default = 1
Default = 1
Default = 0
Default = 0
Default = 0
Default = 1
Default = 4
Default = 2
Default = On
Default = On
Default = O
to con rm.