Operation - Baumer CombiPress PFMH Betriebsanleitung

CombiPress™ PFMH/N
Fully welded pressure transmitter with touch screen
8.3 Configuration via FlexProgrammer
DANGER
FlexProgrammer is not ATEX approved for use in explosive atmospheres
Do not use FlexProgrammer in explosive atmospheres.
f
„
Configuring with FlexProgrammer and PC
Remove front cover/DFON display from
f
„
PFMH/N.
Connect FlexProgrammer to sensor.
f
„
Connect FlexProgrammer to PC and set
f
„
parameters (see FlexProgrammer instructions).
1
2
9.

Operation

Display views
Digital
small with details
„ „
large
„ „
Product specific mode
Pressure and
„ „
temperature
12 / 48
Pressure measurement
Graph
horizontal bar
„ „
vertical bar
„ „
time graph
„ „
Operating Instructions
Configuration in explosive atmospheres
9 Power supply off
Disconnect PFMH/N from circuit.
f
„
Remove PFMH/N and take it to a safe area
f
„
(outside the explosive atmosphere).
Start the configuration.
f
„
Options
Pressure/temperature unit
„ „
Pressure range
„ „
Current limits
„ „
Damping
„ „
Data logging
„ „
One or two point trim
„ „
Auto-zero
„ „
Factory reset
„ „
Analogue
analogue
„ „
with bar graph
„ „
with value
„ „
Tank
tank illustration
„ „
bottle illustration
„ „
www.baumer.com