Adding A User; Displaying The Web Application - Sony PWS-100TD1 Handbuch

2
Right-click "Apache Tomcat 7.0 Tomcat7" in the
Services list and select [Properties].
3
Open the [Log On] tab.
4
Click [This account], enter ".\tds" and then enter a
password for user "tds" under [Password].
5
Click the [Apply] button, then click [OK] to close the
dialog.
6
Select "Sony Ingest Service" in the Services list, and
repeats steps 2 to 5.

Adding a user

You can add new users to Windows.
1
Click [User Accounts and Family Safety] in the
control panel.
2
Click [User Accounts] > [Change account type].
3
Click [Add a new user in PC settings].
4
Click [Add a user].
5
Enter a user name, password, and password hint, then
click [Next].
6
Click [Finish].
Next, change the account type.
7
Click [Change account type] under [User Accounts
and Family Safety] in the control panel.
8
Select the user whose account type you want to
change.
9
Click [Change the account type].
10
Select [Standard] or [Administrator], then click the
[Change account type] button.
Changing the computer name
The PWS-100TD1 uses the computer name as part of the
https communications authentication.
To change the computer name, use the following
procedure. A new certificate will be generated.
After the computer name is changed, re-import the new
certificate on the client PC.
1
Select [System and Security] > [System] in [Control
Panel].
30
Setting Up
2
Click [Computer name] > [Change Settings].
3
Click the [Change] button on the [Computer name] tab
of the [System Properties] dialog.
4
Change the computer name, then click [OK].
5
Restart the computer when prompted to restart.
6
Sign in to the PWS-100TD1 unit again.
7
Open Command Prompt as an administrator, and enter
the following commands.
> cd C:\Program Files\Sony\TapeDigitize\DIG\script
> keystore.bat
8
Restart the system.
9
Re-import the certificate as described in "Installing
Certificates" (page 31).
Signing out
When finished, sign out from Windows.
1
Move the mouse cursor to the top right corner of the
screen to display the Charms bar, then click [Start].
2
Click the account name on the top right of the screen,
then click [Sign out].

Displaying the Web Application

You connect to the unit via the network from a client PC
and use the web application in a web browser on the client
PC to control and configure the unit.
Recommended client PC environment
CPU: Core i5 3 GHz or higher
Memory: 4 GB or higher
OS: Windows 7 Pro 32/64-bit
Windows 8/8.1 Pro 32/64-bit
Mac OS X 10.8/10.9
Web browser: Google Chrome 40 or later (update to the
latest version)
Display resolution: 1366 × 768 pixels or higher
Connect a computer satisfying the above conditions to the
LAN 1 or LAN 2 connector on the rear panel of the unit.
Enter "https://(IP_address):8443/tds or https://pws-100-
<serial_number>:8443/tds" in the address bar of a web
browser on the computer (where IP_address is the address
specified in "Configuring the network") to display the
web application.