Setting Up; Initial Settings - Sony PWS-100TD1 Handbuch

Setting Up

Initial Settings

Before using the unit, configure the Windows settings
within the unit. The description below describes the
standard settings in Windows 8.
Note
To reboot the unit, first shut down the unit and then turn the On/Standby
button on the front panel on again, without rebooting Windows.
1
Connect a keyboard and mouse to the USB connectors
on the front panel, and connect a monitor to the
DisplayPort connector or HDMI connector on the rear
panel.
2
Set the On/Standby button to the On position.
3
When the Windows login screen appears, enter "tds"
as the user name, enter "tds" as the password, and log
in.
Setting the Windows interface language
1
Hold down the Windows key and press the X key, then
select [Control Panel] from the displayed menu.
2
Select [Clock, Language, and Region] > [Language].
3
Select [Add language] to add a language.
4
Select the language to add, then click [Add].
5
Select the language to use and click [Move up] until
the language is displayed at the top.
6
Sign out and then sign in again.
Configuring the network
1
Connect a LAN cable to the LAN connector on the rear
panel of the unit, and connect the other end to the
network.
2
Click [View network status and tasks] under [Network
and Internet] in the control panel.
3
Click [Connections] > [LAN 1/2].
4
Click the [Properties] button.
5
Select [Internet Protocol Version 4 (TCP/IPv4)], then
click the [Properties] button.
6
Change the IP address and other settings.
7
Click the [Advanced] button to configure DNS,
WINS, and other settings.
8
When finished, click the [OK] button.
Setting the date and time
1
Select [Set the time and date] under [Date and Time]
in the [Clock, Language, and Region] control panel.
2
Click [Change time zone] on the [Date and Time] tab,
and select the time zone.
3
Click [Change date and time] on the [Date and Time]
tab, and set the date and time.
4
Click the [Change settings] button on the [Internet
Time] tab.
5
Specify an NTP server, then click the [Update Now]
button.
6
Place a check mark in [Synchronize with an Internet
time server] to periodically correct the clock using the
NTP server.
Setting user passwords
The default user "tds" is configured for Windows within
the unit. Set the password for the user to provide security.
1
Click [User Accounts and Family Safety] in the
control panel.
2
Click [User Account] > [Change account type].
3
Select the "tds" user.
4
Click [Change the password].
5
Enter a new password and a password hint, then click
the [Change Password] button.
Setting the service password
When setting/modifying the "tds" user password, set the
service password as follows.
1
Double-click [Services] under [Administrative tools]
in the [System and Security] control panel.
29
Setting Up