Chauvet SlimPAR QUAD 3 IRC Schnellanleitung Seite 3

EN
What Is
Included
To Begin
Description
Overview
AC Power
Power Linking
Fuse
Replacement
Infrared Remote
Control (IRC)
· SlimPAR™ QUAD 3 IRC
· Hanging Bracket with Mounting
Hardware
Unpack your SlimPAR™ QUAD 3 IRC and make sure you have received all
parts in good condition. If the box or contents appear damaged, notify the
carrier immediately, not CHAUVET®.
The SlimPAR™ QUAD 3 IRC is a low-profile quad-color (RGBA) LED Par
with built-in infrared remote control capability. Control options include
automated programs, Master/Slave mode and DMX. Two personality choices
are available through 4- and 9-channel DMX modes. Achieve flicker-free
video operation with high-frequency LED dimming.
DMX In
Microphone
Display
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
For the maximum number of SlimPAR™ QUAD 3 IRC products that you
can power link at each voltage, see the sticker on the product or the User
Manual.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The SlimPAR™ QUAD 3 IRC is fully compatible with the Infrared Remote
Control (IRC) from CHAUVET®. For more information on the IRC or to
download instructions, go to www.chauvetlighting.com.
SlimPAR™ QUAD 3 IRC QRG
· Power Cord
· Warranty Card
· Quick Reference Guide
3
Power In
Fuse Holder
Control
Buttons
Power Out
DMX Out
Back Panel View