Getting Started - Ribiland PRASB3000 / 514516 Bedienungs- Und Wartungsanleitung

IV. GETTING STARTED
4.1- Unpacking
- Remove product from its packaging.
- Check that tool and accessories are not damage
4.2- Content
The unit package contains:
- Power unit
- Vacuum/blower Tubes
- 1 Collection bag
- 1 Shoulder strap
- Instructions manual
4.3- Assembly
4.3.1- Tubes (Fig.2)
a) Push the top tube section (3) into the
motor housing (7) and then tighten with
the two screws.
b) Push the lower tube section (1) into
the upper tube section (3) and then
ensure it is correctly and securely fitted.
ATTENTION! The supplied tube parts
have to be mounted otherwise the
machine will NOT work!
[Built-in safety switch! (*)]
(*) Safety switch
Your blower-vacuum has a built-in safety switch that prevents the machine from being started in
case the supplied tubes are not mounted.
4.3.2- Shoulder strap (Fig.3)
Open the snap fastener, and pass it the hanging point (10) on the top of the handle (8) and then
close the snap fastener.
To adjust the shoulder strap to the required or desired length, simply slide the adjustable strap
buckle forward or backwards
4.3.3- Leaf collection bag (Fig.4 & 5)
To secure the leaf collection bag (5) to the machine, simply attach the buckle to the lower tube section
(Fig.4) and fix the bag opening over the leaf discharge point on the bottom of the motor casing (Fig.5).
Fig.3
Fig.4
Fig.2
Fig.5
Page 17 / 44
a)
b)