Edirol UA-1A Bedienungsanleitung Seite 13

If the Microsoft Windows CD-ROM is not inserted
in the CD-ROM drive, the following dialog box
may appear. If this occurs, insert the Microsoft
Windows CD-ROM into the CD-ROM drive, and
click [OK].
fig.02-09.e
fig.02-10.e
6
When installation of the
USB Composite Device
driver is finished, the
following dialog box will
appear. Click [Finish].
fig.02-13.e
7
Next, a USB Audio Device
will be detected
automatically, and the Add
New Hardware Wizard
dialog box will appear.
Click [Next], and continue
the installation using the
very same procedure as in steps 2 – 5 (p.12 – 12).
fig.02-14.e
8
When installation of the
USB Audio Device driver
is finished, the following
dialog box will appear.
Click [Finish].
This completes installation of
the USB Composite Device
driver and the USB Audio Device driver. Restart Windows.
After installing the driver, refer to Specifying the audio
input/output device (p. 14) and select the device Windows
uses.
Connections and driver installation (Windows)
13