Function Selection; General Function - Aigostar 8433325188016 Bedienungsanleitung

Prepare for cooking
1.Opening the lid correctly
● Hold the handle of upper cover, turn it
" "
anticlockwise for about 30° till the
on the edge of the upper cover aiming at
" "
the mark on the edge of the housing
cover, and then lift the upper cover.
2.Check if the parts and accessories of lid are
well installed
● Check if the floater valve and exhaust valve
are jammed, confirm if the sealing ring and
block proof cover are well installed.
3.Take out the inner pot, put the foods and
water into the inner pot
● The total amount of foods and water shall
not exceed the Max marked on the inner
pot.
● The max rice and water amount when
cooking shall not exceed the Max on the
inner pot.
4.Put the inner pot into the cooker
● Wipe to clean the external surface of inner
pot, foreign object and water are not
allowed on the inner surface of electric
pressure cooker;
● Turn the inner pot to left and right to
ensure good contact with the heating plate.
5.Safely close the lid
● Before closing the lid, check if the sealing
ring is well installed.
● Hold the handle of upper cover, aim the
mark on the edge of the upper cover aiming
at the " " mark on the edge of the housing
cover, put the top cover horizontally on the
cooker body, turn the upper cover clockwise
for about 30° to the lock place, and aim the
11
mark
Sealing schematic Exhaust schematic
diagram diagram
" "
" "
mark on the edge of the housing cover at the
6.Put the exhaust valve well
● When working, please turn the exhaust valve to the sealing place, which
means the electric pressure cooker keeps at sealing state;
● For manual exhaust, please turn the exhaust valve handle to the exhaust
place, the electric pressure cooker keeps at the exhaust state; when
exhausting, do not keep the hands or face above the exhaust opening;
● Check if the floater valve drops down before working (before heating, the
floater valve is down).

Function Selection

General Function

1.Prepare for cooking according to the chapter of
"Instructions before use"
2.Switch on If the buttons are inactive when use, please
confirm if the lid is closed at the right place, the buttons are
inactive if the lid is not closed correctly for product of this
series.
3.Select the required function under the standby state, press
the "Menu" button to select function, press the
"+"/"-" button to switch the function; Different function
requires different cooking time, the more the foods, the
longer the cooking time.
4.Press one function button, 10s later, the electric pressure
cooker starts to select the program of corresponding
function 10s after selecting the function, the electric pressure
cooker starts working.
When the cooker is working, press the "Keep Warm/
button to cancel the current work state and return standby
state.
" " mark on the lid.
"
12