Technical And Electrical Data; Hood Mounting Instruction - ORIGO Vac Cart Bedienungsanleitung

© ESAB AB 2011
3

Technical and electrical data

See Figure 1 and the following list for an overview of the unit's physical appearance
and measurements:
1. Horisontal swiveling arm.
2. Start/stop Re-set overload protector.
3. Depending on arm:
• 2 m arm: max. 1650 mm (65").
• 3 m arm: max. 2050 mm (81").
Table 3-1: Technical data
Capacity
Filtration efficiency, main filter
Filtration efficiency, HEPA filter
Filter area, main filter
Filter area, HEPA filter
Motor power
Voltage *
Phase *
Frequency *
Spot light
Transformer
Weight:
Temperature, max. ambient temp.
Temperature, max. airflow temp.
Noise level
Material recycling
*
See type label.
See wiring diagram, Figure 2, for electrical details.
E1: 20 W, 24 V.
F1: Start/stop overload protector.
F2: 1 AT, 5 x 20 mm.
T1: Transformer.
M1: 0.75 kW.
Black: Black wire.
Brown: Brown wire.
Blue: Blue wire.
4

Hood mounting instruction

The fume extractor arm is already fitted. The hood must be fitted according to Figure 3,
items A–D.
A. Insert the hood into the swiveling arm, and fasten together.
B. Adjust the swiveling arm to the correct tension.
C. Ensure that the swiveling arm has the correct tension and can be easiliy
positioned.
D. Fasten the blue hose into the hood and secure it using the tightening ring.
750–1050 m /h (430–620 cfm)
3
> 99 % average weight filtration efficiency
> 99.97 % DOP 0.3 µm
35 m (377 ft )
2 2
7.5 m (81 ft )
2 2
0.75 kW (1 hp)
110/120/2390/240
1 ~
50/60 Hz
20 W, 24 V
24 V secondary
•
71 kg (156 lb) with 2 m arm
•
73 kg (161 lb) with 3 m arm
40 °C (104 °F)
60 °C (140 °F)
73 dB(A) ISO 11203
90 weight-% without filter cartridge
Vac Cart GB
144792(00) 11