General Guidelines; Installation - HQ Power VDLLPLx1 series Bedienungsanleitung

3. General Guidelines

Refer to the Velleman
of this manual.
Keep this device away from dust and extreme temperatures. Do
not use the device with ambient temperatures higher than
35 °C. Make sure the ventilation openings are clear at all times.
For sufficient air circulation, leave at least 1" (± 2.5 cm) in front
of the openings.
Protect this device from shocks and abuse. Avoid brute force
when operating the device.
 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
 Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Do not switch the device on immediately after it has been exposed to
changes in temperature. Protect the device against damage by leaving
it switched off until it has reached room temperature.
 Keep this manual for future reference.
4. Features
 9 segments of 12 LEDs each
 very low power consumption
5. Overview
Refer to the illustration on page 2 of this manual.
1 coloured dome
2 power input

6. Installation

Safety
 Before mounting the product, read and follow the safety
recommendations indicated in the Safety Instructions.
V. 02 – 08/09/2017
VDLLPLx1
® Service and Quality Warranty on the last pages
4
3 speed adjustment
4 mounting bracket
©Velleman nv