WayteQ MP-500 Bedienungsanleitung Seite 16

English
Connecting the power supply
A. Plug the AC adapter (DC 12V) into the DC IN jack on the rear panel.
B. Plug the AC adapter to the power outlet.
Connecting to TV
A. Plug in the 3 color /HDMI connectors to the player on the rear panel.
B. Plug in the other 3 color /HDMI connectors on your AV /HDMI cable to the TV.
Note: Audio connection using audio L/R out or using optical audio out while choose YPbPr video
out
Connecting to PC
A. Make sure the player is powered on;
B. Plug in the squarish (B-Male) connector USB cable to this player's USB Device port;
C. Plug in the rectangular connector (A-Male) of the USB cable to computer.
Then you can manage the contents on the built-in HDD of the player on your PC.
Connecting SD Card/ USB Device
C. Make sure the player is powered on.
D. Plug in the SD Card/USB Stick/USB HDD etc.
In this way, you can browse or play the contents on these memory device.
When turning the HDD into Standby mode, please avoid moving it for 2-3 minutes due to
spin down of the device. Moving the HDD while it is still spinning may damage it. We are
not liable for any data loss or damage caused by inappropriate or careless use.
It is recommended to unplug the unit from the power socket, when not in use.
16
Connection