newchef Electronica Bedienungsanleitung Seite 11

3. Press and release ON/ZERO button to
turn on the unit.
4. Wait until display prompts to '0 g'
before starting weighing.
Convert weight unit
Press the button 'UNIT' to convert
between 'g' (grams) and 'oz' (ounces).
'ZERO' or 'TARE' function
To weigh different loads consecutively
without removing loads from the scale.
1. Put first load on the scale, geht weight
reading.
2. Press ON-ZERO to reset the
LCD reading to "0" before adding
next load.
3. You can repeat this operation.
·
ZERO function: If total sum
of all loads on scale is less than 4 % of
the max. capacity.
(4% = 0.080 kg when
the capacity is 2 kg, 0.200 kg when the
capacity is 5 kg.)
LCD show "o g" each time ON-ZERO is
pressed. lcon 'O' will show on left lower
corner of LCD, indicating 'ZERO' function
is active. Max. weight capacity remains unchanged.
· Function TARA: If total sum of all loads on scale is less than
4 % of the max. capacity.
11