Safety Instructions; Parts Description; Before The First Use - Kiwi KSI 6319 Bedienungsanleitung

SAFETY INSTRUCTIONS

• By ignoring the safety instructions the manufacturer cannot be held responsible for the
damage. • If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard. • Never move the appliance by
pulling from the cord and make sure the cord cannot become entangled. • The appliance must
be placed on a stable, level surface. • This appliance is only to be used for household purposes
and only for the purpose it is made for. • This appliance shall not be used by children from 0 to 8
years old. This appliance can be used by children aged from 8 years old and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning the use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance. Keep
the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user
maintenance shall not be made by children unless they are older than 8 and supervised. • To
protect yourself against an electric shock, do not immerse the cord, plug or appliance in the
water or any other liquid.
• Keep the appliance and its cord out of reach of children less than 8 years of age when it is
energized or cooling down. • Do not left the iron unattended while it is connected to the mains
supply. • Do not open the waterreservoir during use. • Do not use the iron when it's dropped,
if there are visible signs of damage or if it is leaking. • Make sure the iron will be used and rest
on a stable surface. • Remove the plug from the socket before the water reservoir is filled with
water. • Surfaces are liable to get hot during use.

PARTS DESCRIPTION

1. Temperature knob
2. Water tank cover
3. Steam rate control button (for decreasing steam)
4. Spray head
5. Spray button
6. Burst of steam button
7. Soleplate
8. Self-clean button
9. Indicator light
AC220-240V 50/60Hz 2200W

BEFORE THE FIRST USE

• Carefully read all the instructions before using the iron. • Clean the soleplate with a soft damp
cloth before the iron is used for the first time. • Pull out the water tank cover and slowly fill the
water tank with clean cold water using the measuring cup. • Smell or smoke may disperse at the
beginning as caused by the warming up of the insulation material. • NOTE: Some particles may
come out of the soleplate when you use the iron for the first time. This is normal; the particles
are harmless and will stop coming out of the iron after a short while.
USE
Selecting the temperature
• Check the ironing instructions on the garment to be ironed. • If the garment does not have
any ironing instructions but you know the kind of fabric in question, use the chart below. •
Fabrics that have some kind of finish(polishing, wrinkles, contrast)can be ironed at the lowest
temperatures. • If the fabric contains several kinds of fibres ,always select the temperature
applicable, if an article contains 60% polyester and 40% cotton, you must always choose the
temperature corresponding to polyester and without steam. • First classify the garments to be
ironed according to the most suitable ironing temperature: wool with wool, cotton with cotton,
etc. as the iron heats up as fast as it cools, start by ironing the articles requiring the lowest
temperature such as those made of synthetic fibres. Progress towards those that require the
3
2
4
7
2
6
5
1
9
8