If your LAN has any of the following situations such as Router, Existing
DHCP Server or PCs using Fixed (Static) IP Addresses, Please refer to
the full User Manual on the CD-ROM
The ADSL line must be connected before using the configuration.
If you create a connection using EZ-setup wizard, you must run the
EZ-setup wizard again to reconfigure
Basic Information
The default IP address :
The default user name :
the default password :
The default DHCP Range :
Basic Installation
1.1 Back Panel:
The back panel of the ARM-104_v3 1 ADSL 2/2+ Modem Router contains
ADSL, Ethernet Switches, Reset Button and Power Adaptor connection
Port for connecting to the ADSL/ADSL2/ADSL2+
ADSL
Service Provider.
Four 10/100Mbps Ethernet Ports for connecting to the
Ports 1~4
network devices
Restore the 4 Ports ADSL2/2+ Router to factory default
RESET
setting.
12V DC/1A Power adapter connector.
POWER
4-port ADSL2/2+ Modem Router
ARM-104_v3
192.168.1.1
admin,
airlive
192.168.1.x
English
1
1