VISTA UPPAbaby RumbleSeat Montageanleitung Seite 8

STEP 1: Remove canopy from toddler seat prior to
removing canopy fabric. Lift canopy fabric up to view
canopy support chassis and canopy mounting bracket
from interior of canopy. Identify support rods
and
.
STEP 3: Remove
from canopy mounting bracket
by sliding it upward.
RUMBLESEAT OPERATION
REMOVING FABRICS FROM CANOPY
,
STEP 2: Flip canopy over to outside view. With a
small screw driver, push tabs in opening on hinges
in and pull canopy supports
STEP 4: Sliding canopy fabric off of all three exposed
canopy supports.
NOTE: Reverse steps when replacing canopy.
and out.
14