VISTA UPPAbaby RumbleSeat Montageanleitung Seite 5

STEP 1: Prior to fitting adapters to pushchair chassis,
engage brake on pushchair and remove main seat from
chassis. Unsnap basket from front of pushchair chassis.
STEP 3: Hold outside of adapter and rotate over
chassis to snap on. Repeat with second adapter on
other side of pushchair chassis.
RUMBLESEAT ASSEMBLY
ATTACHING ADAPTERS TO VISTA CHASSIS
REMOVING ADAPTERS FROM VISTA CHASSIS
STEP 2: Align adapter with notch opening over top of
basket bar.
NOTE: The adapters are left and right specific. Match
the colored dot to the coordinating color dot on the
pushchair chassis.
STEP 4: Re-attach basket to chassis with snaps.
Grab tab with fingertips and rotate off chassis. Repeat
with second adapter on other side of pushchair chassis.
8