How To Use - InnoEssentials Silk'n Pure Bedienungsanleitung

4.3 How to use

■
Select the brush suitable for your skin type. Gently push
the brush onto the brush attachment point until you hear
a click.
■
Dampen your face with lukewarm water.
■
Moisten the brush with lukewarm water and apply a
cleansing lotion onto the brush.
PLEASE NOTE: Do not use Pure™ without any water on the brush
and on your face as this can cause skin irritation.
■
Turn on the device by pressing the On/Off button and select the desired
mode.
■
Pure™ will automatically start in the "Vibrating function, low-speed" setting.
■
Press the button twice for the "Vibrating function, high-speed" setting.
■
Press the button three times for the "Pulsating function, low-speed" setting.
■
Press the button four times for the "Pulsating function, high-speed" setting.
PLEASE NOTE: If you change the setting during the cleansing
treatment, the timer will reset to zero and will start again.
■
Press the brush gently to the area you want to treat and move it in an upward,
circular motion. Try to avoid delicate skin areas e.g. around the eyes and on
the lips.
■
Recommended treatment time per area is 10 seconds. We recommend
cleansing in 6 sections - forehead, nose, chin, left cheek, right cheek and neck.
■
The facial brush will automatically switch off after 1 minute, indicating the end
of the cleansing treatment.
■
Rinse your skin with water and pat dry with a towel.
10