Scrapping And Disposal; Summary Of Critical Instructions - Tecno-gaz UNIKA Bedienungsanleitung

The "UNIKA" drier is machine fully manufactured in AISI 304 stainless steel and equipped with fully inert
electromechanical components.
Scrapping must be entrusted upon firms specialising in the recovery of metals.
Do not dump the machine in unattended places or in instable positions.
01) STORE THE ORIGINAL PACKAGING.
02) USE THE MACHINE ONLY TO DRY HEAT-RESISTANT INSTRUMENTARIUM.
03) DO NOT INSERT FLAMMABLE OBJECTS.
04) DO NOT INSERT OBJECTS WASHED WITH FLAMMABLE SUBSTANCES.
05) DO NOT INSERT OBJECTS WASHED WITH SUBSTANCES WHICH EMIT TOXIC GASES WHEN HEATED.
06) PLACE THE MACHINE FAR FROM OTHER APPLIANCES.
07) DO NOT INSERT THE MACHINE IN NARROW PLACES (BUILT-IN).
08) REMEMBER THAT THE MACHINE PRODUCES WATER VAPOUR.
09) DO NOT CLEAN THE MACHINE BY MEANS OF WATER JETS OR BY FLOODING.
10) DO NOT TAMPER INSIDE THE MACHINE.
11) IF REPAIRS ARE NEEDED, CONTACT THE DELIVERY DEPARTMENT OR TECNO-GAZ DIRECTLY
12) IN CASE OF SCRAPPING, SEND THE MACHINE TO SPECIALISED FIRMS.
13) STORE THE PRESENT MANUAL IN GOOD CONDITIONS, AVAILABLE TO THE OPERATOR.
DUKF151_REV5.doc

SCRAPPING AND DISPOSAL

SUMMARY OF CRITICAL INSTRUCTIONS

PAR.14
PAR.15
17