Whispbar K568W Fitting Kit Montageanleitung Seite 7
Basisträgersystem
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
EN
Fitting Kit
K568W
Fit pad carefully over fixed point and clamp
screw.
Repeat for all four positions.
Ensure the pads are in the correct position
and the clamp threads pass through the
crossbar feet.
Repeat for all legs.
Tighten the red plastic knob. The side with
the nut showing should be facing up.
7
Inhaltsverzeichnis
