Operation - Doro AL503 Bedienungsanleitung

English
Connection
1. Connect the telephone cord to the socket marked
telephone, and then to the telephone network socket.
2. A click will be heard when the modular plug is correctly in place.
3. Lift the handset and listen for the dial tone. Your telephone is now
operational.
Wall mounting
The telephone can be wall mounted. This is done with two screws positioned
vertically at a distance of 100 mm; the screws should then fit into the two
'keyholes' at the back of the telephone. This product can also be mounted
directly onto the standard wall plate (Australia only).
Mute button
During a call the microphone can be disconnected for as long as the
is pressed.
Redial button
If the number dialled is engaged or if the last number dialled is to be redialled,
lift the receiver and press the redial button
Recall
Press the recall button
when connected to a PBX (TBR only).
Access to additional network services can be gained by using the recall button
and keys. Contact your network operator for more information.
* #
2

Operation

followed by the extension number to transfer calls
R
underneath the
T
.
r
button
z
,
R
www.doro.com