AKASO TC04 Handbuch Seite 7

• Shot lag: 30seconds, optional from 5 seconds to 60 minutes
Select the shortest period for the camera to wait before it reacts to the successive triggering of
the main sensor after an animal has first been detected. The camera does not record any
images or videos during the selected interval. This prevents the memory card from being filled
with unnecessary shots.
• Sensitivity of the motion sensors
The sensitivity of the main motion sensor is set here. For interior areas and environments
with little interference, select "High". Select "Medium" for exterior areas and environment
with a normal amount of interference, and select "Low" for environment with a high level
of interference.
• Target recording time
Press "MENU" to find "Target recording time". Press "OK", and then select "ON"to set the
starting working and ending working time. After finishing setting, the camera only works during
the set time every day. Beyond the period, the camera is in standby.
• Time lapse: Off/On
When "On" has been selected, the camera automatically takes photos or videos in the selected
time interval, irrespective of whether or not the PIR sensor has detected a motion or not. Select
"ON" to set the time interval, and set the values of Hr, Min and Sec. For example, if the process
of flowers blooming has to be recorded, time lapse can be used. The camera automatically
takes pictures in every set time intervals.
• Language: Select the desired menu language
The following languages are available: English, Deutsch, Dansk, Suomi, Svenska, Espanol,
Francais, Italiano, Nederlands, Portugues, Japanese, Chinese.
• Endless Capture
- Here to set Endless Capture. Set "Endless Capture" to "ON", then return to Mode, select video
mode and press OK Button to record, the video will automatically be saved as a file(depends on
the chosen video and video length). Then recording time on LCD screen starts at zero. When
the memory is full, the first video would be covered and continue recording.
- When recording starts, to switch modes is not available. To switch modem please stop
recording first.
- When the battery runs out, the camera will stop working. But the video will be saved
automatically.
• Photo stamp: On/Off (only available for photos, not for videos)
Select "ON" to print the date, time, temperature and moon phase on each photo. Otherwise
select "Off".
• Password protections
After selecting "On" enter a four digit password to protect your camera against unauthorized
access. Press "OK", and then select "ON" to set the password of the camera. The password is a
4-digit number selected between 0-9. If the password is lost, press MENU and REPLAY key at
the same time, and slide the operating mode selector switch from OFF to SETUP position. The
camera is unlocked.
9
• Time & date
Set the time and date according to current time. Press Left/Right key to choose the number
and change the value by pressing Up/Down key. Confirm the changes with OK key.
Time format: 12/24hr
Date format: dd/mm/yyyy, yyyy/mm/dd, mm/dd/yyyy
Settings
Settings Set time date
Time Time format
Time Date format
La
Ti
Ph
Back Select
MENU OK
• Format memory card
All files are deleted by formatting the memory card. Press OK button and confirm formatting
by selecting "Yes".
We recommend formatting the memory card if it has already been used in other devices or if it
is a new card.
Caution: Ensure that files still required have been backed up prior to formatting!
• Serial NO. : Off/On (can only be used for photos not for videos)
Select "On" to assign a serial number to the camera. As soon as "On" has been confirmed by
pressing the OK button, the individual serial number can be inserted. The serial number is
4-digit number selected between 0-9.
4. Replay
- Take down the camera from where it's fixed. Slide the operating mode selector switch to"SETUP"
position. Press replay key and Up/Down key to review the photos/videos.
- While reviewing photos, press Up/Down key to page up/down. While reviewing videos,
press OK key to start playing, press OK one more time to stop. Press replay key to return
into standby.
• Delete selection
You can use this function to delete individual recordings from the memory card. Press MENU
key under the mode of playback, move the select bar to "Delete current file" and press OK to
delete the selected recording.
• Delete all recordings
- You can use this function to delete all recordings from the memory card. Press MENU
- key under the mode of playback, move the selection bar to "Delete all files" and press OK to
delete all recordings.
Settings
Settings
dd/mm/yyyy
Time 01/11/2017
yyyy/mm/dd
Time 12:10
mm/dd/yyyy
La
Ti
Ph
Select
Back
MENU OK
10