Driver Installation; Hardwareinstallation - i-tec PCE2S1P Gebrauchsanweisung

EN
INTRODUCTION
PCIe to 2S1P adapter is card to PCIe slot in PC type PCI express. After instalation
of drivers this adapter is as standard 2xCOM ports and 1xLPT-parallel port.
This card offers output RS232 type DB9 Male for asynchronous connection of
I/O devices, e.g. external modem, GSM modem, printer with serial port, barcode
reader etc. and also standard parallel (LPT) port for connection e.g. printers.
Baud rate on serial port enables using in applications in automatization,
monitoring and control of industrial processes.
SPECIFICATION
• Interface: PCI express specification 1.1
• Ports: 2x Serial RS232 type DB9 (Male) and 1x parallel type DB25 (Female)
• UART: Support UART types by 450 to 550 (fully programmable)
• Speed data rates up to 1,5Mbps
• FIFO receiver/transmitter works with data size up 256 byte
• Support Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced
Capability Port (ECP)
• Data rate on Serial port up 230400bps and on Parallel port up 1,5Mbps
• Support Plug&Play and Hot Swap
• Operation system: Win 7/8/10 32+64bit, Linux, DOS
PACKAGE
• 1x PCIe to 2S1P adapter
• 1x Panel with cables for 2xDB9 serial
• 3x Low Profile Backplate
• Manual

DRIVER INSTALLATION:

(Note: Drivers are available here: www.i-tec.cz/en/)
For Windows 7/8/10 32_64bit
®
1. Don't insert the PCIe card into PCIe slot.
2. Download corresponding drivers and unpack (unzip) them to HDD from
www.i-tec.cz/en/.
3. Click on the "StnSetup.exe" button for the installation of drivers from a
corresponding directory for the OS and "Exit" to finish installation.
4. Shutdown the PC. Place the PCIe card into PCIe slot and then power on the system.
5. Once the system gets booted the Windows will automatically start installing
the device driver software. If it is necessary, restart the PC.
HARDWARE INSTALLATION
(Warning: at first read instructions of driver installation)
Note: Connection of the COM connector- a red core in the cable from DB-9
belongs to the sign ∆ on the PCE card
6
Quick Start / PCIe to 2S Adapter 2x Serial 1x Parallel(PCE2S1P)