Inhaltsverzeichnis
Werbung
S4000 Sound SErver
CONFIGURING YOUR REMOTE TO
CONTROL OTHER DEVICEs
The TV and Amp keys on the remote control may be
individually configured to control a range of televisions
and amplifiers from well known manufacturers.
Please note that we cannot guarantee compatibility with
all devices.
Configuring the Remote to Control your
Television
•
Press the
TV and O Select keys simultaneously; hold
them down for 1 second.
The TV key will remain lit for 20 seconds; the
configuration process must be completed during this
time.
•
Enter the 3 digit numeric code matching the
manufacturer of your television. (Please see the
documentation for your television.)
•
Press the
TV button again.
The TV key will blink twice to indicate that the
configuration has been accepted. If the TV key does not
blink, begin the process again, taking care to enter the
number exactly as printed in the list. If the television is
switched on during the configuration process, entering
the correct code will cause the television to go into
standby.
To configure the remote to control your amplifier, follow
the above procedure, pressing the AMP key in place of
the TV key, and using the appropriate numeric code for
your amplifier.
REMOTE CONTROL UsE IN A MULTIROOM
sYsTEM
Your Sound Server remote control can be configured so
that every button press indicates to the system which
output is to be controlled. This means that whenever
infrared is received by the Sound Server the TV display
will automatically switch to controlling the appropriate
output.
Configuring the Remote with a Default Output
Audio Server and O Select keys
•
Press the
simultaneously; hold them down for 1 second.
The Audio Server key will remain lit for 20 seconds; the
configuration process must be completed during this
time.
•
Enter the 3 digit code corresponding to the output
you would like to control (valid configurations are
listed in Appendix A). For example, to set Output 6
as your default output, press:
0 0 6
•
Press the
Audio Server button again.
The Audio Server button will blink twice to indicate
that the configuration has been accepted. If the Audio
Server button does not blink twice begin the process
again, taking care to enter the number correctly.
Pressing any navigation key on the remote should
now cause the Sound Server to switch to the correct
output. The remote control can still be used to control a
different output in the normal way; pressing the Home
Output key will return it to controlling the default
output.
© Copyright Prism Media Products Ltd 2015
UsING THE REMOTE TO QUICKLY FIND
WHAT YOU WANT
scrolling
If you have a lot of media, finding the particular item
you want can be tedious so we've introduced the
concept of SpeedScrolling.
•
When presented with a list of items, if you press
the U or V keys on the remote control, initially the
highlight will scroll fairly slowly up or down.
•
If you keep the button pressed, the list will change
to an alphabet, and the highlight will scroll through
that. This alphabet represents the initial letters of
the items in the list.
•
Once you've selected a letter, you can use standard
scrolling to move through the list of all the items
that start with that letter.
scrolling in the Admin User Interface
When navigating a list in the Admin User Interface you
can use any of several methods.
•
Use the
U or V keys to move the highlight one
item at a time.
G
•
Use the
Page Scroll keys to step through the list a
page at a time.
•
Press the key corresponding to the first letter of the
item you're looking for. So if you were looking for
an item that started with the letter F, you'd press
the 3 key on the remote three times. The list will
jump to the first entry starting with that letter.
[
•
Press the
Alphabetical Scroll key to open a
popup list showing the alphabet. This alphabet
represents the initial letters of the items in the list.
Use the above scroll keys to restrict the list to items
that start with one particular letter.
CHANGING THE DIsPLAY LANGUAGE
Set Up icon and press the O Select
•
Highlight the
‚
key.
•
Highlight the
Change Language button and press
the O Select key.
•
Select your desired language and press the
key.
USER GUIDE
O Select
Page
19
Werbung
Inhaltsverzeichnis
