Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IF-LON – MOUNTING INSTRUCTIONS
Mounting
The IF-LON Interface is suitable for DIN rail mounting.
DIN Rail Mounting
A DIN rail mounting bracket (see Fig. 2) can be used to
mount the IF-LON Interface onto a DIN rail.
After attaching the bracket to the back of the IF-LON Interface
(using two PZ2 screws for plastic, included), the device can
be simply clicked onto the DIN rail.
Fig. 2. Bracket for DIN rail mounting
Configuration
The IF-LON Interface is supplied with the following pre-
settings:
Transceiver ID:
TP/FT-10
Automatic Flush Cancel:
Table 2. Technical specifications
term
Bus interface
USB-conform as per USB specification 1.1, 12
Mbit/sec
Network interface
EIA 709-conform,
Operating temperature +0 °C to +70 °C
Storage temperature
-45 °C to +85 °C
Max. humidity
90% at +50 °C, non-condensing
Listings
CE mark and FCC mark
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:
Automation and Control Solutions
Honeywell GmbH
Böblinger Strasse 17
71101 Schönaich / Deutschland
Phone:
(49) 7031 63701
Fax:
(49) 7031 637493
http://ecc.emea.honeywell.com
Subject to change without notice. Printed in Germany
MU1B-0545GE51 R1013
66
Box checked
remarks
TP/FT-10
3.5
Werbung
