Cleaning The Appliance - UGAS 69189 Gebrauchsanweisung

CARTRIDGE GAS BLOWTORCH
Model: 69189 with piezo ignition
TEMPERATURE: 1.200 °C
CONSUMPTION : 86 g/h
CATEGORY: Butane direct pressure
JET: 0.30 mm
This product works with a butane 190 gr. gas
cartridge. Use this appliance in a ventilated
place.
IMPORTANT WARNING FOR THE USE AND
MAINTENANCE OF THE BLOWTORCH
When � rst lighting the blowtorch, or if
the appliance has been shaken, there is a
possibility of gas coming out: this fact must
not create panic because its length is very
short. Do not modify the appliance
• The manufacturer does not accept
responsibility for problems arising due to
Incorrect use of the appliance
Carelessness during use of the appliance
Alterations and modi� cations of the
appliance
Fitting of incorrect components (gas
cartridge, gasket)
• The appliance works with 190 gr. butane
gas cartridges only
• Before inserting the gas cartridge,
carefully read the instructions printed on
the gas cartridge
• Always use this appliance outside. The
� tting and removing of the gas cartridge
should always be doneoutside
• Butane gas is dangerous, treat it carefully
• Ensure that the appliance is kept out of
reach of children
10
• Do not use the appliance if the gasket is
in poor condition.
• Do not use the appliance if there is a
gas leak, if it is damaged or not working
correctly
• In the case of a gas leak, place the
appliance outside away from � ames and
other � ammable sources ormaterials.
Find the gas leak outside, use soapy
water and never a naked � ame
• The support surface of the appliance
must be horizontal
• The appliance must not be used near
� ammable materials
• Ensure that the knob of the gas valve is
fully closed before inserting or replacing
the gas cartridge

CLEANING THE APPLIANCE

Before storing the appliance ensure that the
gas valve is fully closed and the appliance is
cleaned carefully. This cleaning is particularly
recommended if the appliance is not to be
used for a long period of time.
INSERTION OF THE GAS CARTRIDGE
• Carefully close the brass gas valve of the
appliance
• Ensure that the pin gasket is in perfect
condition
• Ensure that the gas cartridge to be
replaced is completely empty before
inserting a new one. Never change
acartridge unless the appliance is shut off
• Twist off the bottom of the cartridge
holder. Insert the gas cartridge and twist
on the bottom