Air Live OV-110TMC Kurzanleitung Seite 7

DIP-Switch
S/W No
1
2
3
4
Link Lost Forwarding (DIP-Switch 3): When LLF is enable, it allows UTP link failures to be reported to the
fiber side and also allows Fiber link failure to be reported to the UTP side. Therefore, a link loss forward
feature is provided in both UTP and Fiber side.
Pure Converter mode (DIP-Switch 4): When pure converter mode is enabling (on), it operates with the
minimum latency. The transmission flow does not wait until entire frame is ready, but instead it forwards the
received data immediately after the data being received. And TP port should be forced at 100M in this
application. When DIP-Switch is in Switch Converter mode (off), the converter function is same as Switch
Hub.
Status
ON UTP 100Mbps Full Duplex mode
OFF UTP Auto-Negotiation
ON Fiber in Half Duplex
OFF Fiber in Full Duplex
ON LLF Enable
OFF LLF Disable
ON Pure converter mode
OFF Switch Converter mode
OV-110TMC/OV-110TMT/OV-110TSC
Description
English
5