Removing The Chassis Cover - Supero SC733-Serie Bedienungsanleitung

SC733 Chassis Manual
4-2

Removing the Chassis Cover

2
Remove
Screws
Removing the Chassis Cover:
1. Power down the system and remove the power cord from the rear of the
power supply.
2. On the rear of the chassis, remove the two screws holding the cover in place.
3. Slide the cover back, toward the rear of the chassis
4. Lift the cover off the chassis.
Warning: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airflow and
prevent overheating.
Figure 4-1: Removing the Chassis Cover
3
4-2