Herunterladen Inhalt Inhalt
Teilen
Diese Seite drucken
ASROCK M8 Serie Bedienungsanleitung
  1. Anleitungen
  2. Marken
  3. ASROCK Anleitungen
  4. PCs
  5. M8 Serie
  6. Bedienungsanleitung

ASROCK M8 Serie Bedienungsanleitung

Vorschau ausblenden
Inhaltsverzeichnis

Werbung

Quicklinks

Diese Anleitung herunterladen
User
Manual

Werbung

Inhaltsverzeichnis
loading

Verwandte Anleitungen für ASROCK M8 Serie

Inhaltszusammenfassung für ASROCK M8 Serie

  • Seite 1 User Manual...
  • Seite 2 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Seite 3 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply) The terms HDMI™...

  • Seite 4: Important Safety Instructions

    Important Safety Instructions Pay close attention to the following safety instructions before performing any of the operation. Basic safety precautions should be followed to protect yourself from harm and the product from damage: • Operation of the product should be carried out by suitably trained, qualified, and certified personnel only to avoid risk of injury from electrical shock or energy hazard.

  • Seite 5: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at http://www.asrock.com/support/tsd.asp...

  • Seite 6: Package Contents

    In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this product, please visit our website for specific information about the model you are using.

  • Seite 7: Product Specifications

    • Storm Black Material • Steel Body / Aluminum + Plastic Dimension • 372mm (W) x 123mm (H) x 400mm (L) • ASRock Z87-M8 Motherboard • Supports 4 Gen Intel® Core i7 / i5 / i3 / Xeon® / Pentium® / Celeron® Processor Family Memory • Supports DDR3 1600/1333/1066 MHz, 2 x SO-DIMM...
  • Seite 8 * Max. Supported VGA Dimension: 290mm x 137mm x 43.5mm; Max. Supported TDP: 200W (If you use a graphics card with over 200W TDP, please note that the system’s power supply is only 450W.)

  • Seite 9: Unique Features

    LED, FAN-Tastic Tuning, OC Tweaker and a whole lot more. ASRock Instant Flash ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This conve- nient BIOS update tool allows you to update the system BIOS in a few clicks without preparing an additional floppy diskette or other complicated flash utility.
  • Seite 10 And it also boosts the speed of Adobe Photoshop 5 times faster. Another advantage of ASRock XFast RAM is that it reduces the frequency of accessing your SSDs or HDDs in order to extend their lifespan.
  • Seite 11 Windows® 8 brings the ultimate boot up experience. The lightning boot up speed makes it hard to access the UEFI setup. ASRock Restart to UEFI allows users to enter the UEFI automatically when turning on the PC. By enabling this function, the PC will enter the UEFI directly after you restart.
  • Seite 12 ASRock Easy Driver Installer For users that don’t have an optical disk drive to install the drivers from our support CD, Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver to your system via an USB storage device, then downloads and installs the other required drivers...

  • Seite 13: Chapter 2 Product Overview

    Chapter 2 Product Overview This chapter provides diagrams showing the location of important components of the M8. 2.1 Front View Description A-Command (All-In-One OLED Button) Optical disk drive eject button 4 x USB 3.0 ports 4-in-1 Card reader (SD3.0/MMC/MS/MS PRO) Microphone jack Headphone jack...
  • Seite 14 2.1.1 The Function of A-Command The A-Command is a multipurpose controller knob which is used to cycle through various functions. Controlling A-Command • Rotate the knob to toggle among main functions or options. • Press once to confirm your selection. Powering on the System Press A-Command to turn on the system power.
  • Seite 15 Off: Toggle off the light in the case All off: Toggle off the light in the case; enable the Good Night LED function *ASRock Good Night LED technology offers you a better sleeping environment by extinguishing the unessential LEDs. By enabling Good Night LED, the Power/HDD LEDs will be switched off when the system is powered on.

  • Seite 16: Rear View

    2.2 Rear View Description PCIe slot covers I/O panel AC input power connector...
  • Seite 17 2.2.1 I/O Panel...
  • Seite 18 No. Description No. Description Line In port (light blue) eSATA2 port** Line Out port (lime) DisplayPort Center/Subwoofer port (orange) HDMI port Rear Speaker Out port (black) USB3.0 port LAN RJ-45 port* (Intel Gigabit LAN) 14 USB3.0 port USB2.0 ports USB3.0 port USB2.0 ports USB3.0 port USB2.0 ports...

  • Seite 19: Inside View

    2.3 Inside View Description Riser card retention bracket VGA card holder Hard disk drive tray (compatible with 4 x 2.5" HDD or 1 x 3.5 HDD) ODD + 2.5" HDD Tray (compatible with 1 x slot-in ODD and 1 x 2.5" HDD) Power supply unit (450W) Power panel connector SATA 3.0 connectors...
  • Seite 20 Front audio connector USB3.0 connector Auxiliary fan connector 2T2R WiFi Module (802.11ac) CPU socket DIMM sockets Chassis fan connector ATX 12V power connector Hard drives are not included with this system.

  • Seite 21: Chapter 3 Hardware Installation

    Chapter 3 Hardware Installation This chapter helps you assemble the chassis and install components. Please follow the installation procedures listed below. Installation Procedures Removing the side panels Removing the top cover Removing the VGA card holder Removing the riser card Installing the hard drives Installing the CPU Installing the CPU Fan and CPU Cooler...

  • Seite 22: Removing The Side Panels

    3.1 Installing System Components 3.1.1 Removing the Side Panels To remove the side panels, you have to unlock the keylock on the top cover using the system key. Before unlocking, power off the system and unplug the power cord. After the side panel are replaced, make sure to lock the keylock on the top cover and then power on the system.

  • Seite 23: Removing The Top Cover

    3.1.2 Removing the Top Cover 1. To remove the top cover, you have to follow the procedures below: 1) Power off the system and unplug the power cord. 2) Unlock the keylock on the top cover using the system key. 3) Follow the instructions in Section 3.1 to remove the right side panel.
  • Seite 24 5. Draw out the mounting bracket from the chassis. 6. Follow the instructions in Section 3.1 to release the left side panel. 7. Release the top cover. Slide the top cover toward the front of the system until it releases. Lift up the top cover.
  • Seite 25 3.1.3 Removing the VGA Card Holder To remove the VGA card holder, you have to remove the side panels and top cover, giving you access to the VGA card holder inside. 1. Remove the VGA card holder. Remove the two screws that hold the VGA card holder in place. Lift the VGA card holder up and off the chassis.
  • Seite 26 3.1.4 Removing the Riser Card 1. Remove the riser card. Remove the two screws securing the riser card retention bracket. Grasp the riser card by its edges, and carefully pull it from the expansion slot.
  • Seite 27 3.1.5 Installing the Hard Drives 3.1.5.1 Installing the Hard Drive(s) to the Drive Tray Assembly 1. To install the hard drives, you have to remove the VGA card holder and the riser card , giving you access to the drive tray assembly inside. 2.
  • Seite 28 2. Take apart the drive tray assembly. Remove the screws that secure the bottom HDD tray with the top tray. Take the assembly apart. 3. Install a 3.5" HDD or up to four 2.5" HDD. Installing a 3.5-Inch Hard Drive: Set the top tray aside.
  • Seite 29 Installing up to Four 2.5-Inch Hard Drive Place the first 2.5" HDD to the bottom HDD tray and secure the hard drive using the four screws (two on the sides and two in the rear). Place the second 2.5" HDD to the top HDD tray and secure the hard drive using the four screws.
  • Seite 30 3.1.5.2 Installing the Hard Drive to the ODD + 2.5" HDD Tray 1. To install the hard drives, you have to remove the PSU. 2. The ODD + 2.5” HDD Tray fits a slim slot-in optical disk drive (ODD) and a 2.5-inch hard drives.
  • Seite 31 2. Remove the ODD+2.5" HDD Tray. Unplug the ODD SATA power connector. Remove the five screws securing the ODD + 2.5" HDD Tray to the chassis. Lift the tray off the chassis. 3. Place a 2.5" HDD to the HDD tray and secure the hard drive using the four screws (four in the rear).
  • Seite 32 4. Align the screw holes on the ODD + 2.5" HDD Tray with the screw holes on the chassis. Fasten the five screws. 5. Connect the power and SATA data cables and the ODD SATA power connector. 6. Re-install the PSU. Align the PSU with the starting line and then slide the PSU to the left until it reaches the end line.
  • Seite 33 3.1.6 Replacing the ODD 1. Follow the instructions in section 3.1.5.2 to remove the power supply unit and lift the tray off the chassis. 2. Remove the old optical disk drive. 3. Slide a new optical disk drive into the ODD tray. 4.

  • Seite 34: Installing The Cpu

    3.1.7 Installing the CPU 1. Before you insert the 1150-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Seite 36 Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
  • Seite 37 3.1.8 Installing the CPU Fan and CPU Cooler...
  • Seite 38 1. Make sure to evenly spread the thermal paste over the CPU to improve heat dissipation. 2. Ensure that the CPU and the CPU cooler are securely fastened and in good contact with each other. 3. To make sure the CPU cooler is seated properly, it is highly recommended to check whether or not the CPU temperature reported in the BIOS is at a normal level.
  • Seite 39 3.1.9 Installing Memory Modules (SO-DIMM) This motherboard provides two 204-pin DDR3 (Double Data Rate 3) SO-DIMM slots. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise, this motherboard and SO-DIMM may be damaged. The DIMM only fits in one correct orientation.
  • Seite 41 3.2 Replacing System Components 3.2.1 Replacing the Riser Card 1. Replace the riser card. Align the riser card keys correctly with the expansion slot on the system board and insert it into place. Fasten the two screws securing the riser card retention bracket.
  • Seite 42 3.2.2 Installing the Graphics Card The M8 chassis supports both single-slot graphics card and dual-slot graphics card. Before graphics card installation, please lift the VGA card holder and make sure the riser card is installed properly. 1. Open the latch of the VGA card holder and remove the screws that secures the slot cover.
  • Seite 43 5. Engage the VGA card holder with the two vertical sliding tracks while sliding it back to the chassis. 6. Make sure the VGA card holder is secured by the tongue plate and the graphics card is seated correctly. 7. Secure the VGA card holder with the chassis using the two screws previously removed.

  • Seite 44: Replacing The Top Cover

    3.2.3 Replacing the Top Cover 1. Place the system in an upright position. 2. Make sure to release the left side panel. 3. Connect the 4-pin top fan connector. 4. Replace the top cover. Replace the top cover onto the chassis. Slide the top cover toward the rear of the system until it clicks into place.
  • Seite 45 5. Insert the mounting bracket into the mounting holes. 6. Secure it to the case with the three screws previously removed.
  • Seite 46 3.2.1 Replacing the Side Panels 1. Place the system in an upright position. 2. Replace the side panels. Snap the right side panel into place. Snap the left side panel into place. 3. Lock the system keylock on the top cover.

  • Seite 47: Motherboard-Layout

    Chapter 4 Motherboard 4.1 Motherboard Layout PCIE1 SATA3_1 USB_1_2 64Mb HD_AUDIO1 BIOS SATA3_2 SATA3_5 MINI_PCIE1 PANEL1 Intel Sound CORE3D SATA3_6 WiFi-802.11ac SATA3_3 Module SATA3_4 USB 3.0 T: USB0 CMOS B: USB1 Battery USB 3.0 Top: T: USB4 RJ-45 B: USB5 USB 2.0 T: USB6 B: USB7...
  • Seite 48 No. Description System Panel Header (PANEL1) LPC Debug Header (LPC1) SATA3 Connectors (SATA3_1, SATA3_2, SATA3_3, SATA3_4, SATA3_5, SATA3_6) Clear CMOS Jumper (CLRCMOS1) Auxiliary Fan Connector (AUX_FAN1) USB 2.0 Header (USB_1_2) mini-PCI Express Slot (MINI_PCIe1) WiFi-802.11ac Module Front Panel Audio Header (HD_AUDIO1) CPU Fan Connector (CPU_FAN1) ATX 12V Power Connector (ATX12V1) Chassis Fan Connector (CHA_FAN1)
  • Seite 49 4.2 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when a jumper cap is placed on these 2 pins.
  • Seite 50 4.3 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power HDLED+ PLED+...
  • Seite 51 Serial ATA3 Connectors These six SATA3 SATA3_1 (SATA3_1) connectors support SATA (SATA3_2) data cables for internal SATA3_2 (SATA3_5) storage devices with up to (SATA3_6) 6.0 Gb/s data transfer rate. SATA3_5 (SATA3_3) SATA3_4 connector is (SATA3_4) shared with the eSATA SATA3_6 (see p.41, No.
  • Seite 52 Front Panel Audio Header This header is for MIC2_L MIC2_R (9-pin HD_AUDIO1) OUT2_R connecting audio devices J_SENSE (see p.41, No. 9) to the front audio panel. OUT2_L OUT_RET MIC_RET PRESENCE# GN D 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup- port HDA to function correctly.
  • Seite 53 ATX Power Connector This motherboard pro- (24-pin ATXPWR1) vides a 24-pin ATX power (see p.41, No. 5) connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin ATX 12V Power This motherboard Connector provides a 4-pin ATX 12V (4-pin ATX12V1) power connector.

  • Seite 54: Installing Drivers

    Chapter 5 Software and Utilities Operation 5.1 Installing Drivers The Support CD that comes with the M8 contains necessary drivers and useful utilities that enhance the M8’s features. Running The Support CD To begin using the support CD, insert the CD into your CD-ROM drive. The CD automatically displays the Main Menu if “AUTORUN”...

  • Seite 55: Operation Mode

    5.2 A-Tuning A-Tuning is ASRock’s multi purpose software suite with a new interface, more new features and improved utilities, including XFast RAM, Dehumidifier, Good Night LED, FAN-Tastic Tuning, OC Tweaker and a whole lot more. 5.2.1 Installing A-Tuning When you install the all-in-one driver to your system from ASRock’s support CD, A-Tuning will be auto-installed as well.
  • Seite 56 Tools Various tools and utilities. XFast RAM Boost the system’s performance and extend the HDD’s or SDD’s lifespan! Create a hidden partition, then assign which files should be stored in the RAM drive. XFast LAN Boost the speed of your internet connection! Select a specific mode for making the designated program's priority highest.
  • Seite 57 Dehumidifier Prevent motherboard damages due to dampness. Enable this function and configure the period of time until the computer powers on, and the duration of the dehumidifying process. Key Master Enhance your mouse and keyboard with customizable macros, sniper modes, scroll speed, key repeat rates and repeat delay.

  • Seite 58: System Info

    OC Tweaker Configurations for overclocking the system. System Info View information about the system.

  • Seite 59: Live Update

    Live Update Check for newer versions of BIOS, A-Tuning or drivers. Tech Service Contact Tech Service.
  • Seite 60 Settings Configure ASRock A-Tuning.
  • Seite 61 5.3 SBX Pro Studio This section explains how to configure the Creative Sound Core3D using SBX Pro Studio. Click the power button on the left to activate or deactivate. Surround Control the level of audio immersion in music, movies and games. Crystalizer Enhance music and movies to make them sound livelier.
  • Seite 62 CRYSTALVOICE Select a recording device Mic Volume Control the level of mic volume. Mic Boost Control the level of mic boost. CrystalVoice Click the power button on the left to activate or deactivate. Morph your voice into different characters and accents. Smart Volume Be heard clearly without having to shout or whisper.
  • Seite 63 SCOUT MODE Scout Mode Enable or disable scout mode. This proprietary technology allows you to hear your enemies from further away, giving you a distinct tactical advantage in combat. Hot Key Configuration Configure hot keys to enable or disable scout mode.
  • Seite 64 SPEAKERS/HEADPHONES Speakers / Headphones Configuration Select the device connected. If there are both speakers and front headphones connected, please select the device you desire to use as audio output. Optional Speakers Center Enable or disable center speaker. Subwoofer Enable or disable subwoofer. Rear pair Enable or disable rear pair speakers.
  • Seite 65 Bass Management Bass Redirection Enable or disable bass redirection. Subwoofer Gain Enable or disable subwoofer gain. Crossover Frequency Redirect all frequencies below this value to the optimal speaker for better bass response. MIXER Playback Speakers Control the level of speakers playback. SPDIF-Out Control the level of SPDIF-Out playback.
  • Seite 66 What U Hear Control the level of playback redirect. EQUALIZER Choose from Flat, Acoustic, Classical, Country, Dance, Jazz, New Age, Pop, Rock and Vocal. JACK SETUP Device Connected: Select the device connected. Show Jack Setup dialog when an audio jack is inserted Enable or disable Jack Setup dialog.
  • Seite 67 ADVANCED FEATURES Play stereo mix to digital output Enable or disable play stereo mix to digital output. PROFILE...

  • Seite 68: User Profiles

    User Profiles You can save, load or delete your user profiles. The default is <Custom>. Note If you want to hear your own voice through the microphone (Playback mode). You can change your settings to "playback mode" by checking the "Listen to this device"...

  • Seite 69: Intel® Rapid Start Technology

    5.4 Intel® Rapid Start Technology Intel® Rapid Start Technology enables your system to wake up faster from deep sleep, saving time and power consumption. Feel secure to know that your system will resume to working condition even if an unexpected power loss happens while the PC is in sleep mode.
  • Seite 70 5.4.2 Setup Guide Configuring Rapid Start Step 1 Run ASRock Rapid Start utility from Start -> All Programs -> ASRock Utility. Step 2 If you have more than one hard drives in your system, you must select one, then choose the Partition Size desired for your hidden partition and click on Create. The system will automatically create a hidden partition according to your settings.
  • Seite 71 Step 3 When prompted to restart after the setup, click Yes to reboot. Step 4 Double-click the Intel® Rapid Start Technology Manager icon in the Windows system tray.
  • Seite 72 Step 5 Make sure Rapid Start is on. Drag the slider to configure the time. For example, if the timer value is set to ten minutes, the system will enable Rapid Start mode after entering sleep state for ten minutes. If the timer is set to 0 minutes, Windows will immediately enable Rapid Start mode as it enters sleep state.
  • Seite 73 will automatically wake up and enable Rapid Start mode after entering sleep state for a period of time. The power of the computer in Rapid Start mode can be cut off, it will not cause data loss of the programs or files you were executing before entering sleep state.

  • Seite 74: Intel® Smart Connect Technology

    5.5 Intel® Smart Connect Technology Intel® Smart Connect Technology is a feature that periodically wakes your computer from Windows® sleep state to refresh email or social networking applications. It saves your waiting time and keeps the content always up-to-date. 5.5.1 System Requirements •...
  • Seite 75 Installing ASRock Smart Connect Utility Step 1 Install ASRock Smart Connect Utility, which is located in the folder at the following path of the Support CD: \ ASRock Utility > Smart Connect. Step 2 Once installed, run ASRock Smart Connect from your desktop or go to Windows Start -> All Programs -> ASRock Utility.
  • Seite 76 Step 3 Click the Add button. Take Foxmail as an example, add Foxmail to the Application list. Step 4 Select Foxmail from the Application List, then click the arrow pointing right to add this application to the Smart Connect List. Step 5 Click Apply to enable Smart Connect.
  • Seite 77 Step 6 Double-click the Intel® Smart Connect Technology Manager icon in the Windows system tray. Step 7 Drag the slider to configure how often the system will connect to the network to download updates. Shorter durations will provide more frequent updates, but may cause more power consumption.
  • Seite 78 The system will wake up from sleep state periodically, and then start to update Foxmail. The screen will not display anything so the computer can maintain minimum power usage. Afterwards, the system will automatically return to sleep state again. Upon waking up the system, you will find the new mail that were sent to you during sleep state are already updated and ready to be read in Foxmail.
  • Seite 79 5.6 Intel® Remote Wake Technology Intel® Remote Wake Technology allows you to use programs or services over the Internet to wake up your home computer from energy efficient sleep mode. Before configuring this feature, verify the following. • Remote Wake has been enabled in "Intel® Smart Connect Technology Manager".
  • Seite 80 Step 2 Click the "My Account" tab. Then click on "New" to create a new mesh. Step 3 A new mesh window will pop up. Enter a mesh name and password. Step 4 Select all the checkboxes and click Create Mesh. Downloading and Installing Mesh Agent Step 1 Click Install on the My Account page.
  • Seite 81 Step 4 Click Install / Update. Step 5 Wait a minute for the New Machine to appear in "My Device".
  • Seite 82 Step 6 Check whether "Intel Remote Wake" appeared or not. Waking up Your PC using PC Step 1 On the "My Devices" page, click on Power Actions. Step 2 Click on Wake or Sleep.
  • Seite 83 Waking up Your PC Using Mobile Device Before waking up your home computer using a mobile device, please log out of MeshCentral on other previously used computers or devices. Step 1 Login to meshcentral.com/m. Step 2 Select a Machine. Step 3 Click on Wake or Sleep.
  • Seite 84 Step 1 Download and install the Streamer on your home computer, which is located in the folder at the following path of the Support CD: \ ASRock Utility > Splashtop Streamer. Then enter your Splashtop Account. If you have not created a Splashtop acount, create one.

  • Seite 85: Using Remote Control

    Using Remote Control Step 1 In "Splashtop 2”, tap an online machine from the list to connect to your home computer. Step 2 Start remotely accessing your home computer. The functionality and price of the Splashtop APP and subscription fee is subject to change.
  • Seite 86 Accessing Data Playing Video...
  • Seite 87 5.7.1 Installing Start8 Install Start8, which is located in the folder at the following path of the Support CD: \ ASRock Utility > Start8. 5.7.2 Configuring Start8 Style Select between the Windows 7 style and Windows 8 style Start Menu. Then select...
  • Seite 88 Configure Configure provides configuration options, including icon sizes, which shortcuts you want Start Menu to display, quick access to recently used apps, the functionality of the power button, and more. Control...
  • Seite 89 Control lets you configure what a click on the start button or a press on the Windows key does. Desktop Desktop allows you to disable the hot corners when you are working on the desktop. It also lets you choose whether or not the system boots directly into desktop mode and bypass the Metro user interface.
  • Seite 90 5.8 XSplit Broadcaster XSplit Broadcaster is a desktop application designed to make your gameplay broadcasting, live-streaming and recording a lot easier and more fun to do, we are giving away the 3 months premium license which is worth US$24.95 for free! 5.8.1 Live Streaming Your Gameplay Step 1 Go to Start > All Programs > XSplit > XSplit Broadcaster to launch it.
  • Seite 91 Step 3 Go to Broadcast > Add Channels…. Step 4 Click Add..Step 5 Select a platform for live streaming. *Before you start streaming, you need to register an account for the streaming service website, such as Twitch.tv, USTREAM, or other livestreaming services.
  • Seite 92 Step 6 Fill in your platform's Username and Password. Based on your needs, configure the Video and Audio Encoding settings. Click OK. Step 7 The channel then appears in your broadcast list. Click Apply and OK to save the settings.
  • Seite 93 Step 8 Go to Broadcast and select the platform to enable live streaming. A link to view your live Broadcast has been copied for you automatically. Simply press CTRL-V or right click and choose Paste to paste the link into the browser, and you can see your broadcast.
  • Seite 94 Chapter 6 UEFI SETUP UTILITY 6.1 Introduction ASRock Interactive UEFI is a blend of system configuration tools, cool sound effects and stunning visuals. Not only will it make BIOS setup less difficult but also a lot more amusing. This section explains how to use the UEFI SETUP UTILITY to configure your system.

  • Seite 95: Navigation Keys

    6.1.2 Navigation Keys Use < > key or < > key to choose among the selections on the menu bar, and use < > key or < > key to move the cursor up or down to select items, then press <Enter>...

  • Seite 96: Main Screen

    When you enter the UEFI SETUP UTILITY, the Main screen will appear and display the system overview. Active Page on Entry Select the default page when entering the UEFI setup utility. UEFI Guide UEFI Guide is a quick tutorial for ASRock's UEFI setup Utility. You may abort the tutorial by pressing "esc".

  • Seite 97: Cpu Ratio

    6.3 OC Tweaker Screen In the OC Tweaker screen, you can set up overclocking features. Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.
  • Seite 98 CPU Cache Ratio The CPU Internal Bus Speed Ratio. The maximum should be the same as the CPU Ratio. BCLK/PCIE Frequency The CPU speed is determined by the CPU Ratio multiplied with the BCLK. Increasing the BCLK will increase the internal CPU clock speed but also affect the clock speed of other components.

  • Seite 99: Dram Timing Configuration

    Short Duration Power Limit Configure Package Power Limit 2 in watts. When the limit is exceeded, the CPU ratio will be lowered immediately. A lower limit can protect the CPU and save power, while a higher limit may improve performance. Primary Plane Current Limit Configure the current limit of the CPU under Turbo Mode in ampere.
  • Seite 100 DRAM Configuration DRAM Tweaker Fine tune the DRAM settings by leaving marks in checkboxes. Click OK to confirm and apply your new settings. CAS# Latency (tCL) The time between sending a column address to the memory and the beginning of the data in response.
  • Seite 101 RAS# Active Time (tRAS) The number of clock cycles required between a bank active command and issuing the precharge command. Command Rate (CR) The delay between when a memory chip is selected and when the first active command can be issued. Write Recovery Time (tWR) The amount of delay that must elapse after the completion of a valid write operation, before an active bank can be precharged.
  • Seite 102 tREFI Configure refresh cycles at an average periodic interval. tCKE Configure the period of time the DDR3 initiates a minimum of one refresh command internally once it enters Self-Refresh mode. tRDRD Configure between module read to read delay. tRDRDDR Configure between module read to read delay from different ranks. tRDRDDD Use this to change DRAM tRWSR Auto/Manual settings.
  • Seite 103 tRDWR Configure between module read to write delay. tRDWRDR Configure between module read to write delay from different ranks. tRDWRDD Configure between module read to write delay from different DIMMs. RTL (CHA) Configure round trip latency for channel A. RTL (CHB) Configure round trip latency for channel B.
  • Seite 104 Command Tri State Enable for DRAM power saving. MRC Fast Boot Enable Memory Fast Boot to skip DRAM memory training for booting faster. FIVR Configuration FIVR Switch Frequency Signature Select whether to boost or lower the FIVR Switch Frequency. FIVR Switch Frequency Offset Configure the percentage of frequency boost or deduction.

  • Seite 105: Cpu Load-Line Calibration

    CPU Cache Voltage Offset Configure the voltage for the CPU Cache. Setting the voltage higher may increase system stability when overclocking. System Agent Voltage Offset Configure the voltage for the System Agent. Setting the voltage higher may increase system stability when overclocking. CPU Analog IO Voltage Offset CPU I/O Analog Voltage.

  • Seite 106: Dram Voltage

    DRAM Voltage Use this to configure DRAM Voltage. The default value is [Auto]. PCH 1.05V Voltage Chipset 1.05V Voltage. Use default settings for best performance. PCH 1.5V Voltage I/O 1.5V Voltage. Use default settings for best performance.
  • Seite 107 6.4 Advanced Screen In this section, you may set the configurations for the following items: CPU Configu- ration, Chipset Configuration, Storage Configuration, Intel® Rapid Start Technology, Intel® Smart Connect Technology, ACPI Configuration and USB Configuration. Setting wrong values in this section may cause the system to malfunction.

  • Seite 108: Cpu Configuration

    6.4.1 CPU Configuration Active Processor Cores Select the number of cores to enable in each processor package. CPU C States Support Enable CPU C States Support for power saving. It is recommended to keep C3, C6 and C7 all enabled for better power saving. Enhanced Halt State (C1E) Enable Enhanced Halt State (C1E) for lower power consumption.

  • Seite 109: Intel Virtualization Technology

    Package C State Support Enable CPU, PCIe, Memory, Graphics C State Support for power saving. CPU Thermal Throttling Enable CPU internal thermal control mechanisms to keep the CPU from overheat- ing. No-Execute Memory Protection Processors with No-Execution Memory Protection Technology may prevent certain classes of malicious buffer overflow attacks.
  • Seite 110 6.4.2 Chipset Configuration Primary Graphics Adapter Select a primary VGA. VT-d Intel® Virtualization Technology for Directed I/O helps your virtual machine monitor better utilize hardware by improving application compatibility and reliability, and providing additional levels of manageability, security, isolation, and I/O performance.
  • Seite 111 Render Standby Power down the render unit when the GPU is idle for lower power consumption. Onboard HD Audio Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and automatically disable it when a sound card is installed. Front Panel Enable/disable front panel HD audio.

  • Seite 112: Storage Configuration

    6.4.3 Storage Configuration SATA Controller(s) Enable/disable the SATA controllers. SATA Mode Selection IDE: For better compatibility. AHCI: Supports new features that improve performance. RAID: Combine multiple disk drives into a logical unit. AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk performance but IDE mode does not have these advantages.
  • Seite 113 Dynamic Storage Accelerator Keep this option enabled for higher HDD and SDD I/O performance, lower latency and increased system responsiveness. Hard Disk S.M.A.R.T. S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a monitoring system for computer hard disk drives to detect and report on various indicators of reliability.
  • Seite 114 6.4.4 Intel® Rapid Start Technology ® Intel Rapid Start Technology Intel® Rapid Start Technology is a new zero power hibernation mode which allows users to resume in just 5-6 seconds.
  • Seite 115 6.4.5 Intel® Smart Connect Technology ® Intel Smart Connect Technology ® Intel Smart Connect Technology automatically updates your email and social networks, such as Twitter, Facebook, etc. while the computer is in sleep mode.
  • Seite 116 6.4.6 ACPI Configuration Suspend to RAM It is recommended to select auto for ACPI S3 power saving. Check Ready Bit Enable to enter the operating system after S3 only when the hard disk is ready, this is recommended for better system stability. ACPI HPET Table Enable the High Precision Event Timer for better performance and to pass WHQL tests.
  • Seite 117 RTC Alarm Power On Allow the system to be waked up by the real time clock alarm. Set it to By OS to let it be handled by your operating system. USB Keyboard/Remote Power On Allow the system to be waked up by an USB keyboard or remote controller. USB Mouse Power On Allow the system to be waked up by an USB mouse.

  • Seite 118: Usb Configuration

    6.4.7 USB Configuration USB Controller Enable or disable all the USB ports. USB 3.0 Controller Enable or disable all the USB 3.0 ports. Legacy USB Support Enable or disable Legacy OS Support for USB 2.0 devices. If you encounter USB compatibility issues it is recommended to disable legacy USB support.
  • Seite 119 In order to prevent users from bypassing OMG, guest accounts without permission to modify the system time are required. UEFI Tech Service Contact ASRock Tech Service if you are having trouble with your PC. Please setup network configuration before using UEFI Tech Service. Easy RAID Installer Easy RAID Installer helps you to copy the RAID driver from the support CD to your USB storage device.

  • Seite 120: Network Configuration

    Save UEFI files in your USB storage device and run Instant Flash to update your UEFI. Internet Flash ASRock Internet Flash downloads and updates the latest UEFI firmware version from our servers for you. Please setup network configuration before using Internet Flash.
  • Seite 121 UEFI Download Server Select a server to download the UEFI firmware. Dehumidifier Function If Dehumidifier Function is enabled, the computer will power on automatically to dehumidify the system after entering S4/S5 state. Dehumidifier Period Configure the period of time until the computer powers on and enables Dehumidifier after entering S4/S5 state.

  • Seite 122: Over Temperature Protection

    6.6 Hardware Health Event Monitoring Screen This section allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, fan speed and voltage. CPU Fan 1 Setting Select a fan mode for CPU Fans 1, or choose Customize to set 5 CPU temperatures and assign a respective fan speed for each temperature.

  • Seite 123: Boot Screen

    6.7 Boot Screen This section displays the available devices on your system for you to configure the boot settings and the boot priority. Fast Boot Fast Boot minimizes your computer's boot time. In fast mode you may not boot from an USB storage device. Ultra Fast mode is only supported by Windows 8 and the VBIOS must support UEFI GOP if you are using an external graphics card.

  • Seite 124: Full Screen Logo

    Boot Beep Select whether the Boot Beep should be turned on or off when the system boots up. Please note that a buzzer is needed. Full Screen Logo Enable to display the boot logo or disable to show normal POST messages. AddOn ROM Display Enable AddOn ROM Display to see the AddOn ROM messages or configure the AddOn ROM if you've enabled Full Screen Logo.
  • Seite 125 Enable to launch the Compatibility Support Module. Please do not disable unless you’re running a WHCK test. If you are using Windows 8 64-bit and all of your devices support UEFI, you may also disable CSM for faster boot speed. Launch PXE OpROM Policy Select UEFI only to run those that support UEFI option ROM only.

  • Seite 126: Supervisor Password

    6.8 Security Screen In this section you may set or change the supervisor/user password for the system. You may also clear the user password. Supervisor Password Set or change the password for the administrator account. Only the administrator has authority to change the settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password.
  • Seite 127 6.9 Exit Screen Save Changes and Exit When you select this option the following message, “Save configuration changes and exit setup?” will pop out. Select [OK] to save changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option the following message, “Discard changes and exit setup?”...
  • Seite 128 1 簡介 感謝您購買 M8，本電競準系統經 ASRock 嚴格品管製作，是一套讓人信賴的可 靠產品。本產品採耐用設計所展現的優異效能，完全符合 ASRock 對品質及耐 用度的承諾。 由於硬體規格可能會更新，所以本文件內容如有變更，恕不另行通知。如本文件有 任何修改，可至 ASRock 網站逕行取得更新版本，不另外通知。若您需要與本產品相 關的技術支援，請上我們的網站瞭解有關您使用機型的特定資訊。 ASRock 網站： http://www.asrock.com。 1.1 包裝內容 • M8 準系統內含： M8 機殼 Mini-ITX 主機板 ( 預先安裝 ) 電源供應器單元 ( 預先安裝 ) 系統風扇 ( 預先安裝 ) • AC 電源線...
  • Seite 129 材質 • 372 公釐 ( 寬 ) x 123 公釐 ( 高 ) x 400 公釐 ( 長 ) 尺寸 • ASRock Z87-M8 主機板 • 支援第 4 代 Intel® Core i7 / i5 / i3 / Xeon® / Pentium® / Celeron®...
  • Seite 130 2 產品概述 本章提供 M8 重要元件位置的圖示。 2.1 前視圖 編號 說明 A-Command ( 萬用 OLED 按鈕 ) 光碟機退出按鈕 4 x USB 3.0 連接埠 4 合 1 讀卡機 (SD3.0/MMC/MS/MS PRO) 麥克風插孔 耳機插孔...
  • Seite 131 2.1.1 A-Command 的功能 A-Command 為多用途控制器旋鈕，用於切換各種不同的功能。 控制 A-Command • 轉動旋鈕，即可切換主要功能或選項。 • 按一下即可確認選擇。 系統開機 按下 A-Command 即可將系統開機。等候作業系統自動載入。 系統關機 OLED 顯示 M8 標誌 / 日期與時間時，按下 A-Command 再選擇「是」關閉系統 電源。 進入 Windows 之前 進入作業系統之前，共有三項主要功能。 • M8 標誌 / 日期與時間： 標誌出現十秒後，畫面即顯示日期與時間。 若讓顯示器閒置 5 分鐘，顯示器將熄滅。 • 燈光： 開啟...
  • Seite 132 開啟 / 關閉機殼內的燈光，或啟用 Good Night LED ( 晚安 LED) 功能 *。 開：開啟機殼內的燈光 關：關閉機殼內的燈光 全關：關閉機殼內的燈光；啟用 Good Night LED ( 晚安 LED) 功能 *ASRock Good Night LED ( 晚安 LED) 技術會將不必要的 LED 關閉，以 營造更好的睡眠環境。啟用 Good Night LED ( 晚安 LED) 後，電源 /HDD LED 將在系統開啟時關閉。系統進入待命／休眠模式時，Good Night LED ( 晚安 LED) 功能也會自動關閉電源及鍵盤 LED。...
  • Seite 133 2.2 後視圖 編號 說明 PCIe 插槽檔板 I/O 面板 AC 輸入電源接頭...
  • Seite 134 2.2.1 I/O 面板...
  • Seite 135 編號 說明 編號 說明 線路輸入連接埠 ( 淡藍色 ) eSATA2 連接埠 ** 線路輸出連接埠 ( 萊姆色 ) DisplayPort 中央 / 重低音連接埠 ( 橘色 ) HDMI 連接埠 後喇叭輸出連接埠 ( 黑色 ) USB3.0 連接埠 LAN RJ-45 連接埠 * (Intel Gigabit USB3.0 連接埠 LAN) USB2.0 連接埠 USB3.0 連接埠...
  • Seite 136 2.3 內視圖 編號 說明 擴充卡固定架 VGA 卡架 硬碟托盤 ( 相容於 4 x 2.5 吋 HDD 或 1 x 3.5 吋 HDD) ODD + 2.5 吋 HDD 托盤 ( 相容於 1 x 吸入式 ODD 與 1 x 2.5 吋 HDD) 電源供應器單元 (450W) 電源面板排針...
  • Seite 137 前置音訊接頭 USB 3.0 排針 輔助風扇接頭 2T2R WiFi 模組 (802.11ac) CPU 插座 DIMM 插座 機殼風扇接頭 ATX 12V 電源接頭 本系統不含硬碟。...
  • Seite 138 1 简介 感谢您购买 M8，这是按照 ASRock 一贯严格质量控制标准生产的性能可靠的游 戏准系统。它提供符合 ASRock 质量和耐久性承诺的精良设计和卓越性能。 由于硬件规格可能已更新，因此，本文档的内容可能会随时更改，恕不另行通知。如 果本文档有任何修改，则更新的版本将发布在 ASRock 网站上，我们不会另外进行通 知。如果您需要与此产品相关的技术支持，请访问我们的网站以具体了解所用型号的 信息。 ASRock 网站： http://www.asrock.com. 1.1 包装清单 • M8 准系统包括 : M8 机箱 Mini-ITX 主板（预安装） 电源装置（预安装） 系统风扇（预安装） • 交流电源线 • 六角螺丝刀 • 螺丝刀套件 • 螺丝包 • 机箱锁定键...
  • Seite 139 • 钢机身 / 铝 + 塑料 材料 • 372mm ( 宽 ) x 123mm ( 高 ) x 400mm ( 长 ) 尺寸 • ASRock Z87-M8 主板 • 支持 4 代 Intel® Core i7 / i5 / i3 / Xeon® / Pentium® / Celeron®...
  • Seite 140 2 产品概览 本章通过图示介绍 M8 重要组件的位置。 2.1 前视图 编号 说明 A-Command（多合一 OLED 按钮） 光驱弹出按钮 4 x USB 3.0 端口 4 合 1 读卡器 (SD3.0/MMC/MS/MS PRO) 麦克风插孔 耳机插孔...
  • Seite 141 2.1.1 A-Command 功能 A-Command 是一个多功能控制旋钮，可用于循环选择不同的功能。 控制 A-Command • 旋转旋钮可在主要功能或选项之间切换。 • 再按一下确认您的选择。 打开系统电源 按 A-Command 打开系统电源。等到操作系统自动载入。 关闭系统电源 在 OLED 显示 M8 标志 / 日期和时间时，按 A-Command 并选择“是”关闭系 统电源。 进入 Windows 前 进入操作系统前有三个主要功能。 • M8 Logo / Date and Time（M8 标志 / 日期和时间）: 标志显示...
  • Seite 142 作数。要了解您手指的移动速度，按一下 A-Command 开始 APM 计数。 再按一下 A-Command 可停止它。 • Light（指示灯）: 打开 / 关闭机壳上指示灯，或启用晚安指示灯功能 *。 On（开）：打开机壳上指示灯 Off（关闭）：关闭机壳上指示灯 All off（全关）：关闭机壳上指示灯；启用晚安 LED 功能 *ASRock 晚安指示灯技术通过使多余的指示灯熄灭，让您有一个更好的睡 眠环境。通过启用晚安指示灯，在系统打开时，电源 / 硬盘 LED 指示灯将 关闭。当系统进入待机 / 休眠模式时，晚安指示灯也会自动关闭电源。 • Time（时间）: 打开 / 关闭时间。 如果此选项被设置为开，M8 标志 / 日期和时间屏幕可用。如果此选项被 设置为关，M8 标志 / 日期和时间屏幕被隐藏。...
  • Seite 143 2.2 后视图 编号 说明 PCIe 槽盖 I/O 面板 交流输入电源接口...
  • Seite 144 2.2.1 I/O 面板...
  • Seite 145 编号 说明 编号 说明 eSATA2 端口 ** 线路输入端口（淡蓝色） DisplayPort 线路输出端口（浅绿色） 中央 / 低音扬声器端口（橙色） HDMI 端口 USB3.0 端口 后面扬声器输出端口（黑色） LAN RJ-45 端口 * (Intel Gigabit USB3.0 端口 LAN) USB2.0 端口 USB3.0 端口 USB2.0 端口 USB3.0 端口 USB2.0 端口 光学 SPDIF 输出端口 USB2.0 端口...
  • Seite 146 2.3 内视图 编号 说明 转接卡固定支架 VGA 卡固定器 硬盘托盘（兼容 4 x 2.5" HDD 或 1 x 3.5 HDD） ODD + 2.5" HDD 托盘 （兼容 1 x 吸入式 ODD 和 1 x 2.5" HDD） 电源装置 (450W) 系统面板接脚 SATA 3.0 接口 USB 2.0 接脚 PCIe 槽...
  • Seite 147 USB 3.0 接脚 辅助风扇接口 2T2R WiFi 模块 (802.11ac) CPU 插槽 DIMM 插槽 机箱风扇接口 ATX 12V 电源接口 此系统中未包括硬盘。...

  • Seite 148: Einleitung

    1 Einleitung Vielen Dank, dass Sie sich für das M8 entschieden haben – ein zuverlässiges Gaming- Barebone-System, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRocks Streben nach Qualität und Beständigkeit erfüllt.

  • Seite 149: Produktspezifikationen

    • Stahlgehäuse / Aluminium + Kunststoff Abmessungen • 372 mm (B) x 123 mm (H) x 400 mm (L) Motherboard • ASRock Z87-M8 Prozessor • Unterstützt Intel® Core -Prozessorfamilie i7 / i5 / i3 / Xeon® / Pentium® / Celeron® der 4. Generation • Unterstützt DDR3 1600/1333/1066 MHz, 2 x SO-DIMM-...

  • Seite 150: Produktübersicht

    2 Produktübersicht Dieses Kapitel enthält Abbildungen mit den Positionen wichtiger Komponenten des 2.1 Vorderseite Beschreibung A-Command (Alles-in-Einem-OLED-Taste) Auswurftaste des optischen LaufwerksA-Command 4 x USB 3.0-Ports 4-in-1-Kartenleser (SD 3.0/MMC/MS/MS PRO) Mikrofonanschluss Kopfhöreranschluss...

  • Seite 151: Die Funktion Von A-Command

    2.1.1 Die Funktion von A-Command Der A-Command ist ein Mehrzweckkontrollregler zum Umschalten zwischen verschiedenen Funktionen. A-Command steuern • Drehen Sie den Knopf zum Umschalten zwischen Hauptfunktionen und Optionen. • Drücken Sie zum Bestätigen Ihrer Auswahl einmal. System einschalten Drücken Sie zum Einschalten des Systems A-Command. Warten Sie, bis das Betriebssystem automatisch lädt.

  • Seite 152: Unter Windows

    Ein: Licht im Gehäuse einschalten Aus: Licht im Gehäuse ausschalten Alles aus: Licht im Gehäuse ausschalten; Good Night LED-Funktion aktivieren *ASRock Good Night LED-Technologie bietet Ihnen eine bessere Schlafumgebung durch Abschaltung nicht benötigter LEDs. Durch Aktivierung von Good Night LED werden Betriebsanzeige/Festplatten-LEDs abgeschaltet, wenn das System eingeschaltet ist.

  • Seite 153: Rückseite

    2.2 Rückseite Beschreibung PCIe-Steckplatzabdeckungen I/O-Blende Netzeingang...
  • Seite 154 2.2.1 I/O-Blende...
  • Seite 155 Nr. Beschreibung Beschreibung Line-In-Port (hellblau) eSATA2-Port** Line-Out-Port (grün) DisplayPort Center/Subwoofer-Port (orange) HDMI-Port Rückseitiger Lautsprecherausgang USB 3.0-Port (schwarz) LAN-RJ-45-Port* (Intel-Gigabit-LAN) 14 USB 3.0-Port USB 2.0-Ports USB 3.0-Port USB 2.0-Ports USB 3.0-Port USB 2.0-Ports Optischer SPDIF-Ausgang USB 2.0-Ports Mikrofonanschluss (rosa) * Es gibt zwei LEDs am LAN-Port. Bitte beachten Sie die nachstehende Tabelle zur Identifikation der LAN-Port-LED. Geschwindigkeits-LED Aktivitäts-/Verbindungs-LED LAN-Port...
  • Seite 156 2.3 Innenseite Beschreibung Riser-Kartenhalterung VGA-Kartenhalterung Festplatteneinschub (kompatibel mit vier 2,5-Zoll-Festplatten oder 1 x 3,5-Zoll- Festplatte) ODD- + 2,5-Zoll-Festplatteneinschub (kompatibel mit einem optischem Slot-In-Laufwerk und einer 2,5-Zoll-Festplatte) Netzteil (450 W) Systemblende-Stileiste SATA 3.0-Anschlüsse USB 2.0-Stileisten PCIe-Steckplatz...
  • Seite 157 Vorderer Audioanschluss USB 3.0-Stileisten Zusatzlüfteranschluss 2T2R-WLAN-Modul (802.11ac) CPU-Sockel DIMM-Steckplätze Gehäuselüfteranschluss ATX-12-V-Netzanschluss Festplatten sind nicht im Lieferumfang dieses Systems enthalten.

  • Seite 158: Contenu De L'emballage

    En cas de modifications du présent document, la version mise à jour sera disponible sur le site Internet ASRock sans notification préalable. Si vous avez besoin d’une assistance technique pour ce châssis, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous utilisez.

  • Seite 159: Spécifications Du Produit

    • Noir orage Matériaux • Corps en acier / aluminium + plastique Dimensions • 372mm (L) x 123mm (H) x 400mm (l) Carte mère • ASRock Z87-M8 ème Processeur • Prend en charge les processeurs 4 Génération Intel® Core i7 / i5 / i3 / Xeon® / Pentium® / Celeron®...

  • Seite 160: Vue D'ensemble Du Matériel

    2 Vue d'ensemble du matériel Ce chapitre comprend des diagrammes illustrant l'emplacement de composants critiques de votre châssis M8. 2.1 Vue avant Description A-Command (bouton OLED tout-en-un) Bouton d'éjection du lecteur optique 4 x ports USB 3.0 Lecteur de cartes 4 en 1 (SD3.0/MMC/MS/MS PRO) Prise microphone Prise casque...
  • Seite 161 2.1.1 Fonction de la A-command La A-command est un bouton multifonction qui permet de sélectionner diverses fonctionnalités. Contrôle de la A-command • Faites tourner le bouton pour sélectionner une fonction principale ou une option. • Appuyez une fois pour confirmer votre choix. Mise en route du système Appuyez sur la A-command pour allumer le système.

  • Seite 162: Sous Windows

    Arrêt : éteint l'éclairage du châssis Arrêt total : éteint l'éclairage du châssis ; active la fonction Good Night LED *La technologie Good Night LED d'ASRock crée un cadre de sommeil apaisant en éteignant tous les voyants LED non essentiels. En activant la fonction Good Night LED, les LED d'alimentation/disque dur resteront éteints lorsque le...

  • Seite 163: Vue Arrière

    2.2 Vue arrière Description Caches pour fentes PCIe Panneau E/S Connecteur entrée d’alimentation CA...
  • Seite 164 2.2.1 Panneau E/S...
  • Seite 165 No. Description No. Description Port entrée ligne (témoin bleu) Port eSATA2** Port sortie ligne (citron vert) DisplayPort Port Centre/Caisson de basse (orange) 12 Port HDMI Port sortie haut-parleur arrière (noir) Port USB3.0 Port LAN RJ-45* (Intel Gigabit LAN) Port USB3.0 Ports USB2.0 Port USB3.0 Ports USB2.0...

  • Seite 166: Vue Interne

    2.3 Vue interne Description Support de maintien du rehausseur de carte Porte-carte VGA Plateau pour lecteur de disque dur (compatible avec 4 x HDD 2,5" ou 1 x HDD 3,5) Plateau ODD + HDD 2,5" (compatible avec 1 x ODD slot-in et 1 x HDD 2,5") Bloc d'alimentation (450W) Embase du panneau système Connecteurs SATA 3.0...
  • Seite 167 Embases USB 3.0 Connecteurs du ventilateur auxiliaire Module WiFi 2T2R (802.11ac) Socket processeur Sockets DIMM Connecteurs du ventilateur du châssis Connecteur d’alimentation ATX 12V Les disques durs ne sont pas livrés avec ce système.

  • Seite 168: Contenuto Della Confezione

    Congratulazioni per l’acquisto di M8, un sistema barebone di gioco affidabile prodotto secondo i severissimi controlli di qualità ASRock. La scheda madre offre eccellenti prestazioni con un design robusto che si adatta all'impegno di ASRock di offrire sempre qualità e durata.

  • Seite 169: Specifiche Del Prodotto

    • Corpo si acciaio / alluminio + plastica Dimensioni • 372 mm (P) x 123 mm (H) x 400 mm (L) Scheda madre • ASRock Z87-M8 • Supporto della famiglia di processori 4 Gen Intel® Core i7 / i5 / i3 / Xeon® / Pentium® / Celeron®...

  • Seite 170: Descrizione Del Prodotto

    2 Descrizione del prodotto Questo capitolo fornisce diagrammi che mostrano la posizione dei componenti chiave di M8. 2.1 Veduta frontale Descrizione A-Command (Tasto OLED All-In-One) Tasto d’ e spulsione unità ottica 4 x porte USB 3.0 Lettore di schede 4 in 1 (SD3.0/MMC/MS/MS PRO) Connettore microfono Connettore cuffie...
  • Seite 171 2.1.1 Funzione della manopola A-Command A-Command è una manopola di regolazione polivalente utilizzata per scorrere tra varie funzioni. Controllo della manopola A-Command • Ruotare la manopola per passare tra le principali funzioni od opzioni. • Premere una volta per confermare la selezione. Accensione del sistema Premere la manopola A-Command per accendere il sistema.
  • Seite 172 All off (Disattiva tutto): Disattiva la luce del case; abilita la funzione Good Night LED. *La tecnologia ASRock Good Night LED offre un migliore ambiente per dormire spegnendo i LED non essenziali. Abilitando Good Night LED, i LED alimentazione/HDD si spengono quando il sistema è acceso. La funzione Good Night LED spegne automaticamente i LED alimentazione e della tastiera quando il sistema accede alla modalità...

  • Seite 173: Veduta Posteriore

    2.2. Veduta posteriore Descrizione Coperchi alloggi PCIe Panello I/O Connettore ingresso alimentazione AC...
  • Seite 174 2.2.1 Panello I/O...
  • Seite 175 No. Descrizione No. Descrizione Porta ingresso linea (azzurro) Porta eSATA2* Porta uscita linea (verde lime) DisplayPort Porta diffusore centrale/subwoofer Porta HDMI (arancione) Porta uscita diffusori posteriori (nero) 13 Porta USB3.0 Porta LAN RJ-45* (LAN Intel Gigabit) 14 Porta USB3.0 Porte USB2.0 Porta USB3.0 Porte USB2.0 Porta USB3.0...
  • Seite 176 2.3 Veduta interiore Descrizione Staffa di contenimento della scheda riser Supporto scheda VGA Cassetto unità disco rigido (compatibile con 4 x HDD 2,5" o 1 x HDD 3,5") Cassetto ODD + HDD 2,5" (Compatibile con 1 x ODD slot-in e 1 x HDD 2,5") Alimentatore (450W) Header sul pannello del sistema Connettori SATA 3.0...
  • Seite 177 Connettore audio frontale Embases USB 3.0 Connettore ventola ausiliaria Modulo WiFi 2T2R (802.11ac) Socket CPU Prese DIMM Connettore ventola telaio Connettore alimentazione ATX 12V I dischi rigidi non sono inclusi con questo sistema.

  • Seite 178: Contenido Del Paquete

    Web de ASRock sin previo aviso. Si requiere soporte técnico relacionado con este producto, visite nuestro sitio Web para obtener información específica acerca del modelo que está utilizando. Sitio Web de ASRock: http://www.asrock.com.

  • Seite 179: Especificaciones Del Producto

    Dimensiones • 372 mm (AN) X 123 mm (AL) X 400 mm (LA) Placa base • ASRock Z87-M8 • Admite la familia de procesadores Intel® Core i7 / i5 / i3 / Xeon® / Pentium® / Celeron® de la 4ª generación • Admite DDR3 1600/1333/1066 MHz, 2 ranuras SO-DIMM...

  • Seite 180: Información General Del Producto

    2 Información general del producto En este capítulo se proporcionan diagramas que muestran la ubicación de los componentes importantes de su M8. 2.1 Vista frontal Nº Descripción A-Command (botón OLED todo en uno) Botón de expulsión de la unidad de disco ópticaA-Command (botón OLED todo en uno) 4 puertos USB 3.0 Lector de tarjetas 4 en 1 (SD3.0/MMC/MS/MS PRO)
  • Seite 181 2.1.1 Función de A-Command A-Command es un mando de control multifunción que se utiliza para recorrer varias funciones. Controlar A-Command • Gire el mando para cambiar entre las funciones u opciones principales. • Presione una vez para confirmar la selección. Encender el sistema Presione A-Command para encender la alimentación del sistema.
  • Seite 182 Todo desactivado: Apague la luz de la carcasa; habilite la función Good Night LED. *La tecnología Good Night LED de ASRock mejora el entorno de sueño apagando los LED innecesarios. Al habilitar Good Night LED, los LED de alimentación y de disco duro se apagarán cuando esté encendido. Good Night LED también apagará...

  • Seite 183: Vista Posterior

    2.2 Vista posterior Nº Descripción Tapas de ranura PCIe Panel de E/S Conector de alimentación de entrada de CA...
  • Seite 184 2.2.1 Panel de E/S...
  • Seite 185 Nº Descripción Nº Descripción Puerto de entrada de línea (azul claro) 10 Puerto eSATA2** Puerto de salida de línea (verde lima) DisplayPort Puerto central y para amplificador de Puerto HDMI graves (naranja) Puerto Salida de los altavoces traseros Puerto USB3.0 (negro) Puerto LAN RJ-45* Puerto USB3.0...

  • Seite 186: Vista Interna

    2.3 Vista interna Nº Descripción Soporte de retención de la tarjeta vertical (tipo riser) Soporte de la tarjeta VGA Bandeja para unidad de disco duro (compatible con 4 unidades de disco duro de 2,5" o 1 unidad de disco duro de 3,5) Bandeja para unidad de disco óptica + unida de disco duro de 2,5"...
  • Seite 187 Ranura PCI Conector de audio frontal Cabezales USB 3.0 Conector para el ventilador auxiliar Módulo WiFi 2T2R (802.11ac) Zócalo para CPU Zócalos DIMM Conector para el ventilador del chasis Conector de alimentación ATX de 12 V Las unidades de disco duro no se incluyen con este sistema.

  • Seite 188: Комплект Поставки

    Благодарим вас за приобретение надежной игровой базовой системы M8, выпускаемой под постоянным строгим контролем компании ASRock. Система обеспечивает великолепную производительность и характеризуется прочной конструкцией в соответствии с требованиями компании ASRock в отношении качества и долговечности. В случае обновления спецификации на аппаратное обеспечение содержимое настоящей...
  • Seite 189 Цвет • "Черная буря" Материал • Металлический корпус/ алюминий + пластик Размер • 372 мм (Ш) х 123 мм (В) х 400 мм (Д) Материнская • ASRock Z87-M8 плата го ЦП • Поддержка процессоров 4- поколения Intel® Core i7 / i5 / i3 / Xeon® / Pentium® / Celeron®...

  • Seite 190: Обзор Изделия

    2 Обзор изделия В данной главе представлены диаграммы расположения важных компонентов М8. 2.1 Вид спереди № Описание A-Command (Универсальная кнопка ОСИД) Кнопка извлечения оптического диска 4 порта USB 3.0 Устройство чтения карт 4-в-1 (SD3.0/MMC/MS/MS PRO) Разъем для подключения микрофона Разъем для подключения наушников...

  • Seite 191: Включение Питания Системы

    2.1.1 Функции A-Command A-Command - это многоцелевая ручка управления, которая используется для выбора различных функций. Управление с помощью кнопки "A-Command" • Поверните ручку для выбора основных функций или параметров. • Нажмите один раз для подтверждения выбора. Включение питания системы Чтобы включить питание системы, нажмите на кнопку "A-Command" Подождите, пока...
  • Seite 192 Выкл.: Выключение подсветки в корпусе Выкл. все: Выключить подсветку в корпусе; активировать функцию Good Night LED *Технология Good Night LED компании ASRock повышает эффективность режима неактивности, отключая ненужные светодиодные индикаторы. Активация технологии Good Night LED позволяет отключить индикаторы питания и жесткого диска при включении питания системы. Функция...

  • Seite 193: Вид Сзади

    2.2 Вид сзади № Описание Крышки гнезда PCIe Панель ввода-вывода Разъем подключения к сети переменного тока...
  • Seite 194 2.2.1 Панель ввода-вывода...
  • Seite 195 № Описание № Описание Порт линейного входа (голубой) Порт eSATA2** Порт линейного выхода (салатовый) 11 DisplayPort Центральный канал/сабвуфер Порт HDMI (оранжевый) Порт выхода тыловых динамиков Порт USB3.0 (черный) Порт LAN RJ-45* (Intel Gigabit LAN) 14 Порт USB3.0 Порты USB2.0 Порт USB3.0 Порты...
  • Seite 196 2.3 Вид внутри № Описание Скобка для крепления переходной платы Держатель карты VGA Лоток для жесткого диска (совместимый с 4 жесткими дисками 2,5'' или 1 жестким диском 3,5'') Лоток для оптического диска + жесткого диска 2,5'' (совместимый с 1 разъемом для подключения оптического диска и 1 жестким...
  • Seite 197 Гнездо PCIe Аудиоразъем на передней панели Колодки USB 3.0. Разъем дополнительного вентилятора Модуль 2T2R WiFi (802.11ac) Гнездо ЦП Гнезда DIMM Разъем вентилятора корпуса Разъем питания АТХ 12 В Данная система поставляется без жестких дисков.

  • Seite 198: Conteúdo Da Embalagem

    Caso ocorram modificações a esta docu- mentação, a versão actualizada estará disponível no Web site da ASRock sem aviso prévio. Se necessitar de assistência técnica relacionada com este produto, visite o nosso Website para obter informações específicas acerca do modelo que está...

  • Seite 199: Especificações Do Produto

    • Corpo em aço / Alumínio + Plástico Dimensões • 372 mm (L) x 123 mm (A) x 400 mm (C) Placa principal • ASRock Z87-M8 • Suporta processadores Intel® Core i7 / i5 / i3 / Xeon® / ª...

  • Seite 200: Descrição Geral Do Produto

    2 Descrição geral do produto Este capítulo apresenta diagramas que mostram a localização dos componentes do sistema M8. 2.1 Vista frontal N.º Descrição A-Command (Botão OLED tudo em um) Botão de ejecção do disco óptico 4 x portas USB 3.0 Leitor de cartões 4-em-1 (SD3.0/MMC/MS/MS PRO) Tomada para microfone Tomada para auscultadores...

  • Seite 201: Desligar O Sistema

    2.1.1 A função do A-Command O A-Command é um botão controlador multifunções que é utilizado para percorrer as diversas funções. Controlar o A-Command • Rode o o botão para alternar entre as funções principais ou opções. • Prima uma vez para confirmar a sua selecção. Ligar o sistema Prima o botão A-Command para ligar o sistema.
  • Seite 202 Desligar tudo: Desligar a luz da caixa; activar a função de LED de Boa Noite *A tecnologia LED de Boa Noite da ASRock proporciona-lhe um melhor ambiente de sono desligando os LEDs não essenciais. Ao activar a função LED de Boa Noite, os LEDs de Energia/HDD serão desligados quando o sistema estiver...
  • Seite 203 2.2 Vista posterior N.º Descrição Tampas de ranhura PCIe Painel de E/S Conector de alimentação AC...
  • Seite 204 2.2.1 Painel de E/S...
  • Seite 205 N.º Descrição N.º Descrição Porta entrada de linha (azul claro) Porta eSATA2** Porta de saída de linha (verde claro) DisplayPort Porta de Subwoofer/Centro (laranja) Porta HDMI Porta de saída do altifalante traseiro Porta USB3.0 (preto) Porta LAN RJ-45* (Intel Gigabit LAN) 14 Porta USB3.0 Portas USB 2.0 Porta USB3.0...
  • Seite 206 2.3 Vista interna N.º Descrição Suporte de retenção da placa Suporte da placa VGA Compartimento da unidade de disco rígido (compatível com 4 x HDD de 2,5" ou 1 x HDD de 3,5") Compartimento de ODD + HDD de 2,5" HDD (compatível com 1 x ODD de entrada de ranhura e 1 x HDD de 2,5") Fonte de alimentação (450W) Terminal do painel de sistema...
  • Seite 207 Conector de áudio do painel frontal Terminais USB 3,0 Conector da ventoinha auxiliar Módulo WiFi 2T2R (802.11ac) CPU socket Este sistema não inclui os discos rígidos.
  • Seite 208 하드웨어을 업데이트할 수도 있기 때문에 , 이 문서의 내용은 예고 없이 변경될 수 있 습니다 . 이 설명서가 변경될 경우 , 업데이트된 버전은 ASRock 의 웹사이트에서 추가 통지 없이 제공됩니다 . 이 제품과 관련하여 기술적 지원이 필요한 경우 , 당사의 웹사...
  • Seite 209 • 강철 본체 / 알루미늄 + 플라스틱 재질 • 372mm (W) x 123mm (H) x 400mm (L) 치수 • ASRock Z87-M8 마더보드 • 4 세대 Intel® Core i7 / i5 / i3 / Xeon® / Pentium® / Celeron® 프로세서 제품군 지원...
  • Seite 210 2 제품 개요 이 장에서는 M8 의 중요 구성부품의 위치를 보여주는 다이어그램을 제공합니 다 . 2.1 앞면 번호 설명 A-Command ( 올인원 OLED 버튼 ) 광학 디스크 드라이브 꺼내기 버튼 USB 3.0 포트 4 개 4-in-1 카드 리더 (SD3.0/MMC/MS/MS PRO) 마이크...
  • Seite 211 2.1.1 A-Command 의 기능 A-Command 는 여러 기능 사이에서 전환하는 데 사용되는 다목적 컨트롤러 스 위치입니다 . A-Command 조절 • 스위치를 돌려 주요 기능 또는 옵션 사이에서 전환합니다 . • 한 번 누르면 선택이 확인됩니다 . 시스템 켜기 A-Command 를 눌러 시스템 전원을 켭니다 . 운영체제가 자동으로 로드할 때까 지...
  • Seite 212 꺼짐 : 케이스의 라이트를 끕니다 모두 꺼짐 : 케이스의 라이트를 끄고 Good Night LED 기능을 활성화합니다 . *ASRock Good Night LED 기술은 불필요한 LED 를 꺼서 더욱 편안하게 잠 을 잘 수 있는 환경을 제공합니다 . Good Night LED 를 활성화하면 , 시스템...
  • Seite 213 2.2 뒷면 번호 설명 PCIe 슬롯 커버 I/O 패널 AC 입력 전원 커넥터...
  • Seite 214 2.2.1 I/O 패널...
  • Seite 215 번호 설명 번호 설명 라인 입력 포트 ( 담청색 ) eSATA2 포트 ** 라인 출력 포트 ( 라임색 ) DisplayPort 센터 / 서브우퍼 포트 ( 주황색 ) HDMI 포트 후면 스피커 출력 포트 ( 검정 ) USB3.0 포트 LAN RJ-45 포트 * (Intel Gigabit LAN) 14 USB3.0 포트...
  • Seite 216 2.3 내부 번호 설명 라이저 카드 고정 브래킷 VGA 카드 홀더 하드 디스크 드라이브 트레이 (2.5" HDD 4 개 또는 3.5" HDD 1 개와 호환 ) ODD + 2.5" HDD 트레이 ( 슬롯 삽입식 ODD 1 개와 2.5" HDD 1 개와 호환 ) 전원공급장치...
  • Seite 217 USB 3.0 헤더 보조 팬 커넥터 2T2R WiFi 모듈 (802.11ac) CPU 소켓 DIMM 소켓 섀시 팬 커넥터 ATX 12V 전원 커넥터 하드 드라이브는 별도로 구입하셔야 합니다 .
  • Seite 218 ステムです。 アスロックの品質と耐久性の取り組みに準拠した堅牢な設計を持つ、 優れたパフォーマンスを提供します。 ハードウェアの仕様は更新されるこ とがあるため、 このマニュアルの内容は予告なしに変 更するこ とがあります。 このマニュアルの内容に変更があった場合には、 更新されたバー ジョンは、 予告なく アスロックのウェブサイ トから入手できるようになります。 この製品に 関係して技術サポートが必要な場合は、 ご使用のモデルに関する詳細情報について、 弊 社ウェブサイ トをご覧く ださい。 ASRock ウェブサイ ト : http://www.asrock.com。 1.1 パッケージの内容 • M8 ベアボーンシステム : M8 シャーシ Mini-ITX マザーボード （プリインストール済み） 電源供給ユニッ ト （プリインストール済み）...
  • Seite 219 • スチール製本体 / アルミニウム + プラスチック 材料 • 372mm ( 幅 ) x 123mm ( 高さ ) x 400mm ( 長さ ) 寸法 マザーボード • ASRock Z87-M8 世代 • 第 4 Intel® Core i7 / i5 / i3 / Xeon® / Pentium® / Celeron®...
  • Seite 220 2 製品の各部の名称 この章では、 M8 の主要コンポーネントの位置を図で説明します。 2.1 前面図 番号 説明 A-Command （ オールインワン OLED ボタン） 光学ディスク ドライブのイジェク トボタン 4 x USB 3.0 ポート 4-in-1 カードリーダー （SD3.0/MMC/MS/MS PRO） マイクロフォンジャック ヘッ ドフォンジャック...
  • Seite 221 2.1.1 A-command の機能 A-command は、 さまざまな機能を切り替える際に使用する多目的コントローラノ ブです。 A-command を制御する ノブを回転してメイン機能またはオプションを切り替えます。 • 1 回押して選択を確定します。 • システムの電源をオンにします。 A-command を押してシステムの電源をオンにします。 オペレーティ ングシステム が自動的に読み込まれるまでお待ちく ださい。 システムの電源をオフにします。 OLED に M8 Logo / Date and Time （ M8 ロゴ / 日付と時刻） が表示されたら、 A-command を押し、 「 Yes （はい） 」 を選択してシステムの電源をオフにします。 Windows を開く前に...
  • Seite 222 O（オフ） : ケース内のライ トをオフにします All o（すべてオフ） : ケース内のライ トをオフにして、 Good Night LED （グッ ド ナイ ト LED） 機能を有効にします *ASRock の Good Night LED （グッ ドナイ ト LED） テク ノロジーは不必要な LED を消灯して、 スリープ状態の環境を改善します。 Good Night LED （グッ ドナイ ト LED） 機能を有効にした場合は、 システムの電源を入れると、 電源...
  • Seite 223 2.2 背面図 番号 説明 PCIe スロッ トカバー I/O パネル AC 入力電源コネクター...
  • Seite 224 2.2.1 I/O パネル...
  • Seite 225 番号 説明 番号 説明 ライン入力ポート （明るい青色） eSATA2 ポート ** ライン出力ポート （ライム色） DisplayPort センター / サブウーファーポート HDMI ポート （オレンジ色） リアスピーカー出力ポート （黒色） USB3.0 ポート LAN RJ-45 ポート * USB3.0 ポート (Intel Gigabit LAN) USB2.0 ポート USB3.0 ポート USB2.0 ポート USB3.0 ポート USB2.0 ポート オプティカル...
  • Seite 226 2.3 内側の図 番号 説明 ライザーカードのリテンションブラケッ ト VGA カードホルダー ハードディスク ドライブトレイ （4 x 2.5" HDD または 1 x 3.5 HDD に対応 します） ODD + 2.5" HDD トレイ （1 x スロッ トイン方式 ODD および 1 x 2.5" HDD に対応します） 電源供給ユニッ ト (450W) システムパネルヘッダー...
  • Seite 227 フロントオーディオコネクター USB 3.0 ヘッダー 補助ファンコネクター 2T2R WiFi モジュール (802.11ac) CPU ソケッ ト DIMM ソケッ ト シャーシファンコネクター ATX 12V 電源コネクター このシステムにはハード ドライブは含まれていません。...

Inhaltsverzeichnis