Technical Data; Special Safety Instructions; Main Components - Probuilder 40702 Gebrauchsanweisung

INSPECTION CAMERA/BORESCOPE
Introduction
To get the most out of your new inspection
camera/borescope, please read this manual
and the safety instructions before use.
We also recommend that you save the
instructions in case you need to refer to
them at a later date.

Technical data

GB
Lens:
Light source:
Gooseneck:
Resolution:
Power supply:
Accessories provided: magnet and hook
Cables provided: USB cable
For use with computers running Windows
XP/7/Vista/8 (USB 2.0)
18
Ø9.8 mm, waterproof
4 x dimmable LEDs
Ø11 mm×83 cm, waterproof
640×480 pixels

Special safety instructions

The borescope must not be used on people
or animals!
The borescope must not be used in places
where it may come into contact with live
objects or moving parts. Turn off engines
and machines, and unplug electrical
appliances before using the borescope on
them.
The lens and gooseneck must not be
exposed to extreme temperatures,
hazardous liquids and liquids that are not
pH-neutral.
Do not make strong bends in the
gooseneck. Do not press too hard on the
USB
lens or gooseneck to push the borescope
forward.
Do not expose the handle to liquids, damp
or splashes.

Main components

1. Button for adjusting brightness
2. Button for photographs
3. Handle
4. Flexible gooseneck
5. Lens
6. Hook and magnet