Resetting The Speaker - Wecele U-ONE Benutzerhandbuch & Bedienungsanleitung

Problem
No audio from the
AUX device
Poor sound quality from
an AUX device
No sound in TF mode
Remote control malfunction

Resetting the speaker

Factory reset clears paired mobile devices and returns it to original factory settings.
1. Power on the speaker.
2. Use a stick (diameter is less than 3.5mm, length is 50mm) to insert into the AUX
connector, when you sense a touch sound, then remove the stick and the speaker screen
turns black. Around 15 seconds later, screen returns to normal display, and the speaker
enters factory setting successfully.
Care and Maintenance
What to do
・Power on the AUX device and play music.
Secure the 3.5mm cable to the speaker's AUX connector and the
・
AUX device.
Increase the volume on the speaker and AUX device.
・
Use a different AUX cable.
・
・ Connect a different AUX device.
・Secure the 3.5mm cable to the speaker's AUX connector and the
AUX device.
Increase the volume on the speaker and AUX device.
・
Use a different AUX cable.
・
Connect a different AUX device.
・
・ Check the music file of TF card.
S ecure the TF card connector.
・
Increase the volume on the speaker.
・
Replace another TF card with music file.
・
・ Replace another battery.
Replace a new remote control.
・
English- 21