Safety Instructions And Precautions; Installation; Maintaining And Cleaning - kikkaride Dotty ride Gebrauchsanweisung

SAFETY INSTRUCTIONS AND PRECAUTIONS

• Maximum user weight - 25 kg
• Use personal protective equipment (in particular, helmets, gloves, knee pads and elbow pads).
• Do not use in tra c.
• The toy should be used on at surfaces free from obstacles.
• During use, constant supervision of an adult is recommended.
• Depending on age and the assembly version, children should have the appropriate psycho-motor skills to ensure that the tricycle is used
safely.
• In order to avoid falls and collisions causing injuries to the user or third parties, parents/guardians should instruct their children to observe
the safety precautions. Before your child starts using the tricycle, explain the rules of safe use of the product.
• Recommended for children from the age of 9 months. The safest areas to ride a tricycle are areas with limited or excluded tra c such as
private areas, playgrounds, school playgrounds, recreation areas.
PARTS
1. Frame 2. Rear wheels 3. Front wheel 4. Front fork 5. Bumper 6. Front fork xing screws 7. Handlebars xing scres 8. Handlebars
9. Mounting spanner 10. Bell 11. Basket 12. Basket xing screw 13. Seat 14. Guardrails 15. Backrest 16. Seat cover 17. Visor 18. Parent
handle 19. Cupholder 20. Pull rod 21. Mudguard xing screw 22. Front basket 23. Seat nut 24. Mounting spanner

INSTALLATION

Slide the rear wheels (2) in the frame (1) until you hear a click (Fig. A). Attach the mudguard (5) to the frame (1) using a screw (21). Put the front
wheel (3) in the fork (4) and tighten the front fork xing screws (6) (Fig. B). Place the front basket (22) on the frame (1). Attach the handlebars
(8) to the frame (1) using the spanner (9) and xing screw (7). Fix the bell (10) to the handlebars (8). Put the pull rod (20) in the opening on the
left side of the fork (4) and x the other end under the frame (1) at the point of attachment of the parent handle (Fig. C). Use the xing screw
(12) to attach the basket (11) to the frame (1) (Fig. D). Attach the backrest (15) and the guard rails (14) to the seat (13). Then place the seat cover
(16) and do not forget to install the harness (Fig. E). Place the assembled seat facing or back to the direction of travel on the frame and tighten
the nut (23) underneath the frame (Fig. F). Insert the visor (17) in the sides of the backrest (15). Fix the cupholder (19) to the parent handle (18)
and insert it in the hole on the frame until the latch is locked (Fig. G).
ADJUSTING
Cover location - press the red buttons on both sides of the cover and set in a convenient position. You can also use buckles on top of the cover.
Footrests - depending on the level of child development, the footrests can be folded to enable the child to ride the tricycle. Whenever
footrests are unfolded, enable the pedal lock in the front wheel (red button).
Harness - adjust the length to hold the child rmly, but not to block movements.
Seat position - the seat can be adjusted forwards and backwards, and turned rearwards. To do this, unscrew the nut (22) and set the
appropriate position. After tightening, make sure the seat is securely fastened.
Folding the rear wheels - slightly lift the tricycle and push the red button under the frame, rotate the rear wheels forwards.
Older children can ride without a backrest - slide the seat cover down, remove the backrest unlocking the levers on its sides, rotate the
guardrails 90° backwards and pull out. To ride without the backrest, the child should wear additional harness which is located under the seat.
Adjusting the length of the parent handle - unfold and lock in a comfortable position.

MAINTAINING AND CLEANING

Seat cover, backrest, handlebars cover: Remove from the frame. Wash at max. 30°C, gentle process. Do not bleach. Do not dry in a tumble
dryer. Do not iron. Do not dry clean.
Visor: Do not wash. Do not bleach. Do not dry in a tumble dryer. Do not iron. Do not dry clean. Clean with a clean and damp cloth using mild
soap. Allow to air dry. Do not immerse in water.
Frame: Clean the metal frame with a soft, clean and damp cloth using mild soap.
STORAGE: Keep out of the reach of children.
ENGLISH