Main Components - Max 55240 Gebrauchsanweisung

Main components

1. SDS drill chuck
2. Chiselling selector
3. Lubricant cover
4. Handle
5. On/off button
6. Drill/rotary hammer selector
7. Cord and plug
8. Carbon brush holder
9. Support grip
10. Depth stop
11. Chisels
12. Drill bits
13. Spanner for lubricant cover
14. Drill chuck with toothed rim
15. Key for drill chuck
16. Dust cap
1 1
9 9
3 3
2 2
Preparation
Attaching the support handle
The support grip (9) can be rotated 360°
around the � ange at the front of the rotary
hammer, e.g. below or horizontally out from
the drill chuck, for the best possible support.
Undo the assembly collar by turning the
support handle anticlockwise and pushing
the assembly collar in past the SDS drill
chuck and in over the � ange on the rotary
hammer. Turn the support handle to the
required position and retighten it.
4 4
5
6 6
7 7
bl bm
8 8
br
bq
bn bo bp
25
GB