Automatic Functions; Intensity Of Stimulation; Special Functions; Automatic Switching-Off - Wintec EASY BAND Gebrauchsanweisung

EASYBANDMULTI rev. 3.0 170 x 148.qxd 11/02/2004 17.54 Pagina 12

Automatic functions

Automatic Switching-off

If the electric stimulator is not in use for more than 5 minutes and the intensity in both channels is on 0, the device
automatically switches-off.

Electrode contact

If the electrodes are not correctly placed on the skin or the cables are not well connected, the intensity of the channels
is automatically shut off to 0.
In case the electrodes are not correctly placed before starting a treatment, it is not possible to increase the channel
intensity.
This is a security measure to preserve the user from unpleasant possible effects.

Empty battery

The battery indicator lights up on the display when the batteries are almost empty. As long as stimulation feels the
same as usual you can continue the stimulation. It is time to replace the batteries when stimulation starts diminishing
or the stimulator shut off.

Intensity of stimulation

The intensity value for obtaining a particular contraction is completely subjective. It can depend on a series of factors
like as the electrode position, the adipose stratum, the perspiration etc. For these reasons the same current intensity
value can give different sensations from a person to another from a day to another or furthermore you could feel more
contraction on the left limb rather than the right one.
You have to regulate it on the bases of your sensations.

Special Functions

Keyboard lock key

Once reached the wished intensity level, it is possible to lock the keys except for the ON / OFF switch by pressing
the LOCK key for 3 seconds. This function will avoid you their accidental use during the treatment. The keyboard
lock is released when the key is pressed for three seconds again.
Note: You cannot change the intensity value during the rump up and ramp down in all intermittent programs that
foresees cycles of work and recovery.
It is proihibit the reproduction and the copy of this manual without written permission of producer. REV. ING. 3.0
10