Installation Of Product - Panasonic FY-3009U1 Montage- Und Bedienungsanleitung

How to install
3. Wiring
■Wiring is required to follow the local wiring regulations.
Otherwise, it may cause fire.
■Please select 60227 IEC 53 ordinary polyvinyl chloride sheathed cord.
Nominal cross-sectional area of conductors is 3×1.0mm
Otherwise, it may cause fire.
■The product is not provided with Double pole switch and leakage protection
switch. Please purchase them in market.
■It is required to use terminal (not supply) that complies IEC 60998 and wiring
box (not supply) that complies local regulation.
■Wiring should be firmly connected without any loose.
Wiring box
(not supply)
Neutral
Power
supply cord
Earth wire
■ Connect the power cord (included earth) of product to lead wire in accordance with the wiring
diagram.
■ Make sure all connections are fastened firmly after finishing wiring.

4. Installation of product

1. Remove the product from the bottom holes.
2. Fixing the product.
Align the groove of back panel with both sides of
mounting plate. Fit the hooks into the top holes
of mounting plate.
Groove
Mounting plate
3. Fasten the screws. (3 places)
Notice
The torque is suggested to be 1.2N·m.
7
WARNING
Live Brown
(N) (L) (L)
Terminal block
(not supply)
Back panel
Lead wire
from source
Blue
(N)
Power cord
of the product
Green/Yellow
(Earth)
Top holes
.
2
Power cord
of the product
Air curtain
Bottom holes