Cleaning & Maintenance; Troubleshooting - CombiSteel 7465.0210 Gebrauchsanweisung


CLEANING AND MAINTENANCE AFTER EVERY USE;
•
Always turn off the appliance and disconnect from the power supply before cleaning.
•
Clean the inside of appliance after every use.
•
Clean the inside and outside of the appliance with moist cloth and then dry.
•
Do not use abrasive cleaning chemicals as these can leave harmful residues.
Do not clean the appliance by spraying water directly, otherwise electric motor may get damaged.

PERIODIC CLEANING AND MAINTENANCE;
•
Maintenance should be done by qualified person.
•
Get the periodic maintenance of the appliance once in every 15 days.
•
Check the wheels, electric connections, fan, control system, door and door lock once every 6 months.
•
Check the door wick in periodic time and set. Change the wicks that cannot be used.
THE APPLIANCE DOESN'T OPERATE
THE APPLIANCE DOESN'T HEAT
THE APPLIANCE STOPPED
THE BRAKES CAN NOT BE APPLIED
DOOR IS NOT CLOSED
If cooling is not done at suitable quality
If any function of security doesn't work
 Do not use the appliance.
*If these problems are still going on, contact with our authorized services.
E CLEANING & MAINTENANCE
F

TROUBLESHOOTING

1. Check if the appliance is plugged in.
2. Check the electrical connections and voltage.
1. Check if the thermostat control panel operates or not.
2. Fan may have error. In this situation inform the service.
3. If the control system has error, the appliance doesn't
cool.
1. The appliance can stop due to low voltage. In this
situation check the voltage.
2. If there is any load on banquet trolley, the appliance
may stop.
1. Brakes and Wheels may have error. In this situation
inform the service.
1. The banquet trolley may be overloaded
2. Door lock may have error.
7