Doperation - CombiSteel 7465.0210 Gebrauchsanweisung

*Control panel;
A : Down Arrow Button
B : Up Arrow Button
C : Digital Screen
D : SET Button
E : Menu Button
F : ON/OFF Button
*Operating;
•
Be sure that the inside of the trolley is clean and the trolley is constant to where it is before starting any
process.
•
Plug in the appliance.
•
Switch to ON position.
•
After Indicator lamps signal, inside temperature will be shown.
•
For temperature setting; press set button of upper indicator. Temperature that is adjusted before will be
seen on the screen.
•
With direct buttons
•
Press Set button again.
•
Inner temperature will be seen on the screen again. It means adjusted temperature was saved to memory.
•
You can fill the banquet trolley during cooling process. In this situation cooling time will be a little bit
longer.
•
After Cooling Starts: Switch to OFF position. All lamps will be off.
•
Unplug it and leave the plug on the trolley.
D
(- )
set the desired temperature.
OPERATION
6