Cleaning And Maintenance; Guarantee Certificate; Guarantee Conditions - Beper 40.490 Betriebsanleitung

Wall-mounted Hair dryer Use instructions
2. To turn the appliance on, remove the hair dryer from the wall base and set the speed on 1 or 2, based on
preference
3. To suspend the operation of the appliance, insert the hair dryer into the wall base, leaving the ON/OFF switch
on the selected speed position; to resume operation, just remove the hair dryer from the wall base
4. To turn the appliance off, set the ON/OFF switch on 0
5. In case of sudden shut down of the appliance, immediately set the ON/OFF switch on 0, and let the hair dryer
cool for a few minutes before using again

CLEANING AND MAINTENANCE

Warning: Before performing any maintenance or cleaning, ensure that the appliance is off and unplugged from
the wall socket. Do not put the appliance in water and ensure that the plug and the power cord are always kept
dry. Use a damp cloth to clean the appliance, and wipe dry thoroughly; do not use solvents or abrasive cleansers
or detergents.
TECHNICAL DATA
220-240V ~ 50/60Hz
1700-2000W
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee ap-
plies to material and production defects. The purchase receipt and the guarantee certificate must be submitted
together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating
the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the applian-
ce's efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons
will automatically void the guarantee.

GUARANTEE CONDITIONS

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we
guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products
(such as lamps, batteries, heating elements...) the aesthetic parts are excluded from the guarantee, and any
defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of
the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not
attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of
charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable
part of the product, Beper reserves the right to replace only the very part in question and not the entire product
CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR ATER SALES DEPARTMENT BEPER. E-MAIL as-
sistenza@beper.com WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.
9
EN