Technical Data; Machine Data; Noise And Vibration Declaration Statement; Noise And Vibration Data - Chicago Pneumatic CP 0315 Sicherheits- Und Betriebsanleitung

Safety and operating instructions

Technical data

Machine data

Weight
lb
Type (kg)
CP 0315 13.5
(6.1)

Noise and vibration declaration statement

Guaranteed sound power level Lw according to ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to ISO 11203.
Vibration value A and uncertainty B determined according to ISO 20643. See table "Noise and vibration data"
for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the
machine.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at http://www.humanvibration.com/EU/VIBGUIDE.htm
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.

Noise and vibration data

Type
CP 0315
18
Length
in. Free speed
(mm) rpm
13 750
(320)
Noise
Declared values
Sound pressure Sound power
ISO 11203
Lp
r=1m dB(A) rel guaranteed dB(A) rel
20µPa
77
Air
Consumption
3
foot /min
Output shaft
(l/s)
42
(20)
2000/14/EC
Lw
m/s
1pW
N/A
9800 0554 90a | Original instructions
CP 0315
Motor output
in. hp
45 ⁄ -16 1.2
64
Vibration
Declared values
Three axes values
ISO 20643
A B
2 2
value m/s spread
7.4 1.5