Overview; Design And Function; Main Parts; Labels - Chicago Pneumatic CP 0315 Sicherheits- Und Betriebsanleitung

Safety and operating instructions

Overview

To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.

Design and function

CP 0315 Core Drill is a pneumatic drill for core
cutting with diamond core bits or ordinary drilling
in wood or metal.
It is a powerful, hand-held rotary drill without
percussion. The rotational speed is 750 rpm,
non-reversible. It is suitable for core drilling from 2"
to 6" diameter (typically 3" to 5" diameter).
Typical core drilling depth: 1 ft. (300 mm) but can
be deeper.
It is also suitable for ordinary drilling applications, -
for example drilling 25 to 30 mm diameter holes in
timber or metal, using number 2 Morse taper.
The machine can be used both horizontally and
vertically. No other use is permitted.

Main parts

Air inlet
A.
Throttle handle
B.
C. Vent nipple
12
D. Breast plate
Gear box
E.
Vent nipple
F.
Spindle
G.
H. Motor
I. Handle

Labels

The machine is fitted with labels containing
important information about personal safety and
machine maintenance. The labels shall be in such
condition that they are easy to read. New labels can
be ordered from the spare parts list.
Data plate
Machine type
A.
B. Maximum permitted compressed air pressure
C. Serial number
The warning symbol together with the book
D.
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
E. The CE symbol means that the machine is
EC-approved. See the EC declaration which is
delivered with the machine for more
information. If the CE symbol is missing, it
means that the machine is not EC-approved.
Safety label
To avoid injury, before using or servicing tool, read
and understand separately provided safety
instructions.
9800 0554 90a | Original instructions
CP 0315