Yamaha SPS-LF101 Aufstellungsanleitung Seite 4

4
Attach the cap to the support, and apply the
non-skid pads as shown below.
Non-skid pads
(for support)
5
Connect the speaker cable to the speaker
terminal correctly matching the polarity.
* Refer to the owner's manual of the speakers for
connecting the speaker cables.
NS-F101
Speaker
terminals
4
E-
SETTING UP THE SPEAKER STAND
Cap
Support
Speaker
cable
(included
with NS-
F101)
Support
6
As shown in the diagram, place the spacer
between the speaker and the support, and
use the exclusive speaker mounting screws
to attach the speaker to the support.
* When attaching the speaker, be careful not to
drop it. Dropping the speaker may cause
personal injury.
NS-F101 Speaker cable
(included with
NS-F101)
7
Fix the speaker cable to the base with the
cable protection seal.
Cable protection
seal (for base)
Assembly is complete.
* Do not use speaker
mounting screw in
these screw holes.
Cap
Spacer
Exclusive
speaker
mounting
screws
Support
Speaker cable
(included with
NS-F101)