Alecto IVM-100 Bedienungsanleitung Seite 25

4. TO MOUNT THE CAMERA ON A FIXED SPOT.
The camera may be placed on any horizontal surface.
Attention: Make sure the camera is already registered to the Wi-Fi network.
When the camera is installed and then connected to the mains, it'll re-establish
the connection with the network. Please first check whether a proper connection
can be established with your Wi-Fi router.
Underneath the foot of the camera you'll find a mounting panel for mounting the
camera. Rotate the panel anti-clockwise to remove the mounting panel. Make
sure to properly fix the mounting panel onto the wall with the screws to ensure
that the camera is pointing in the right direction. After mounting the camera, it can
no longer be rotated on its foot. However, you can still increase of decrease the
camera's height. The camera is replaced on the foot with a rotating movement.
The camera lens can be rotated to straighten up the image.
25