Carmen LS170 Gebrauchsanweisung Seite 8

8 • ENGLISH
> CLEANING AND MAINTRANCE
• Clean the device after every use! It can
be cleaned wet or dry.
• Press the device release buttons to
remove the head. Tap the bottom of the
shaver head gently on a flat surface (not
on the foil).
• Dry cleaning : Brush the shaving unit with
the cleaning brush supplied. Also clean
the area under the cutting unit and brush
clean the upper cover. Press the upper
cover back onto the shaver. The housing
can be wiped clean with a damp cloth.
Place the protective cover back over the
shaver before putting it away.
• Wet cleaning: Rinse the head under
warm running water. A natural based
soap may also be used provided it
contains no particles or abrasive
substances. Rinse off all foam.
Remove remaining hair from the housing
with the brush. Leave the shaver to dry
and then replace the trimming head or
epilator. Replace the protective cover
before putting the shaver away.
• The shaving parts need to be lubricated
regularly every 3 months. If you clean
the shave head under running water,
lubricate it after each cleaning. Apply
some light machine oil or Vaseline to the
shaver foil and blade.
• Do not shave with a damaged foil.