Movon R7 Bedienungsanleitung Seite 3

MAKING A CALL
Last number re-dial : Press Multi-Function button shortly.
Voice dial : Press Multi-Function button for 2 seconds.
Once your mobile phone is in voice dialing mode, please follow the step as
your mobile phone instructs. You can de-activate voice dial mode by
pushing Multi-Function button for 2 seconds in voice dialing mode.
[Note] Please check if your mobile phone supports voice dialing function.
Please record voice tag first before you use this function.
ANSWERING A CALL
Press the Multi-function button briefly to receive a call.
REJECT AN INCOMING CALL
Press and hold Multi-Function button for 2 seconds.
ENDING A CALL
Press Multi-Function button shortly while you are on the line.
You can also end a call from your mobile by pushing "END" button.
TRANSFERRING A CALL
Headset to mobile phone: Press and hold Multi-Function button for 2 seconds.
Mobile phone to headset: Press and hold Multi-Function button for 2 seconds.
MIC MUTE
Press and hold volume down button for 2 seconds. Then the MIC mute will be activated.
You can hear the status indication beep every 5 seconds in MIC mute mode.
-3-
You can de-activate the MIC mute mode by pushing volume down button for 2 seconds.
CALL WAITING [3way calling]
Before you use 3way calling function, please make sure that your mobile phone supports
"Handsfree profile". And please check with your network operator if they support Call
hold & Multiparty call service.
1. Connect to incoming call & disconnect your current call.
: Press and hold volume down button for 4 seconds.
2. Put your current call in waiting mode and receive incoming call.
: Press and hold volume up button for 4 seconds.
[TIP] Call waiting mode by pushing "Send" button on your mobile phone.
RESET OF THE HEADSET
Press and hold Multi-Function button & Volume Down button for 4 seconds.
Then all device information and call list of your headset will be reset.
(Please make sure that the headset is not connected)
STATUS INDICATION
1. LED Indication
Status
Power On
Power Off
Pairing Mode
Connectable Mode
Connected Mode
English
LED Indication
Blue LED blinks 3 times
Red LED turns on for 2 seconds
Blue & Red LED blink repeatedly
Blue LED blinks 1 time every 5 seconds
Blue LED blinks 2 times every 5 seconds
-4-
English