ASROCK Fatal1ty FM2A88X+ Killer-Serie Schnellinstallationsanleitung Seite 8

* It is recommended to install the USB Keyboard/Mouse cable to USB 2.0 ports (USB_1_2
and USB_3_4) instead of USB 3.0 ports.
** There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indica-
tions.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Off
Blinking
On
*** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See
the table below for connection details in accordance with the type of speaker you use.
Audio Output
Channels
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to
the front panel audio header. After restarting your computer, you will find the
"Mixer" tool on your system. Please select "Mixer ToolBox"
playback multi-streaming", and click "ok". Choose "2CH", "4CH", "6CH", or
"8CH" and then you are allowed to select "Realtek HDA Primary output" to
use the Rear Speaker, Central/Bass, and Front Speaker, or select "Realtek
HDA Audio 2nd output" to use the front panel audio.
4
Description
No Link
Data Activity
Link
Front
Rear Speaker
Speaker
(No. 9)
V
V
V
V
Speed LED
Status Description
Off 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
Central / Bass
(No. 7) (No. 6)
-- --
V --
V V
V V
Line In or
Side Speaker
(No. 8)
--
--
--
V
, click "Enable