Names Of Parts; Front Panel - Tascam ML-32D Bedienungsanleitung

Names of Parts

Front panel

ML−32D
ML−16D
POWER button and indicator
1
Press this button to turn the unit on and off.
STATUS indicator
2
The STATUS indicator shows the state of the unit by lighting
blue or red or staying unlit. "STATUS indicator lighting status
details" on page 7
SAMPLE RATE indicator
3
The three SAMPLE RATE indicators (44.1k, 48k and ×2) light
to show the sampling frequency status of the unit.
44.1kHz
44.1kHz Lit
48kHz Unlit
88.2kHz Lit
96kHz Unlit
STATUS indicator lighting status details
STATUS indicator
Ordinary operation Lit blue
Malfunctioning Rapidly flashing red
(Dante) (four times per second)
Muted Lit red
Flashing red
Dante network error
(twice per second)
Dante redundancy Blinking blue
error (once per second)
48kHz x2
Unlit Unlit
Lit Unlit
Unlit Lit
Lit Lit
Note
The Dante module is malfunctioning.
The indicator lights red when the clock is stabilizing after the unit starts up and when
the sampling frequency or other Dante setting has been changed, for example.
The Dante network is not connected.
Redundancy is set and the secondary is being used because the primary is unavail-
able.
OL indicators
4
These light when analog input signals overload.
IN SIG indicators
5
These light when sound is being input through the analog
inputs.
Input is judged to have occurred when the signal level ex-
ceeds −60 dBFS.
OUT SIG indicators
6
These light when sound is being output through the analog
outputs.
Output is judged to have occurred when the signal level ex-
ceeds −60 dBFS.
TASCAM ML-32D / ML-16D
7